Search results
Results from the WOW.Com Content Network
By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.
The UK statute chain is 22 yards, which is 66 feet (20.1168 m). This unit is a statute measure in the United Kingdom, defined in the Weights and Measures Act 1985. [6] One link is a hundredth part of a chain, which is 7.92 inches (20.1168 cm).
In practice, bed sizes are usually categorized by the width. The length is typically 200 cm (79 in), but this may vary. The most common sizes are: [citation needed] 120 cm × 200 cm (47 in × 79 in) 150 cm × 200 cm (59 in × 79 in) 180 cm × 200 cm (71 in × 79 in) Other bed sizes are available, which are less common however.
This is commonly used in Europe to denote the incline of a railway. It is sometimes written as mm/m or m/km instead of the ‰ symbol. [1] [2] as a ratio of one part rise to so many parts run. For example, a slope that has a rise of 5 feet for every 1000 feet of run would have a slope ratio of 1 in 200.
The maximum height, width, and length of general Chinese rolling stock are 4,800 mm (15 ft 9 in), 3,400 mm (11 ft 2 in) and 26 m (85 ft 4 in) respectively, with an extra out-of-gauge load allowance of height and width 5,300 by 4,450 mm (17 ft 5 in by 14 ft 7 in) with some special shape limitation, corresponding to a structure gauge of 5,500 by ...
A metric ISO screw thread is designated by the letter M followed by the value of the nominal diameter D (the maximum thread diameter) and the pitch P, both expressed in millimetres and separated by a dash or sometimes the multiplication sign, × (e.g. M8-1.25 or M8×1.25).
Longer bridges can reduce the width of both shoulders to 4 feet (1.2 m). Existing bridges can remain part of the Interstate system if they have at least 12-foot-wide (3.7 m) lanes with 3.5-foot (1.1 m) shoulder on the left and a 10-foot (3.0 m) shoulder on the right, except that longer bridges can have 3.5 feet (1.1 m) shoulders on both sides.
The metric codes still represent the dimensions in mm, even though the imperial size codes are no longer aligned. Problematically, some manufacturers are developing metric 0201 components with dimensions of 0.25 mm × 0.125 mm (0.0098 in × 0.0049 in), [ 31 ] but the imperial 01005 name is already being used for the 0.4 mm × 0.2 mm (0.0157 in ...