Search results
Results from the WOW.Com Content Network
This method of post-installed reinforcement has proven to be cost-effective; however, it requires attention to the interface between steel and the printed concrete. [12] The use of printed concrete as formwork requires higher tensile hoop strength of the concrete, which could be provided by the use of fibers in the mix.
Reinforced concrete, also called ferroconcrete, is a composite material in which concrete's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility.
Marcus's method is a structural analysis used in the design of reinforced concrete slabs.The method was developed by Henri Marcus and described in 1938 in Die Theorie elastischer Gewebe und ihre Anwendung auf die Berechnung biegsamer Platten. [1]
Improve concrete strength at low cost. Adds tensile reinforcement in all directions, unlike rebar. Add a decorative look as they are visible in the finished concrete surface. Polypropylene [18] and nylon fibers can: Improve mix cohesion, improving pumpability over long distances; Improve freeze-thaw resistance
Rebar (short for reinforcement bar or reinforcing bar), known when massed as reinforcing steel or steel reinforcement, [1] is a tension device added to concrete to form reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension.
An important concept is 'cost per unit of function'. For example, if the key design objective was the stiffness of a plate of the material, as described in the introductory paragraph above, then the designer would need a material with the optimal combination of density, Young's modulus, and price.
The most common particle reinforced composite is concrete, which is a mixture of gravel and sand usually strengthened by addition of small rocks or sand. Metals are often reinforced with ceramics to increase strength at the cost of ductility. Finally polymers and rubber are often reinforced with carbon black, commonly used in auto tires. [7]
The Wood–Armer method is a structural analysis method based on finite element analysis used to design the reinforcement for concrete slabs. [1] This method provides simple equations to design a concrete slab based on the output from a finite element analysis software.