Search results
Results from the WOW.Com Content Network
Hot tin-dipping is the process of immersing a part into a bath of pure molten tin at a temperature greater than 450 °F or 232 °C. Tinplate made via hot-dipped tin plating is made by cold rolling steel or iron, pickling to remove any scale, annealing to remove any strain hardening, and then coating it with a thin layer of tin.
The coating color can also be changed with dyes, so color is not a complete indicator of the process used. ISO 4520 specifies chromate conversion coatings on electroplated zinc and cadmium coatings. ASTM B633 Type II and III specify zinc plating plus chromate conversion on iron and steel parts.
Plating is a finishing process in which a metal is deposited on a surface. Plating has been done for hundreds of years; it is also critical for modern technology. Plating is used to decorate objects, for corrosion inhibition, to improve solderability, to harden, to improve wearability, to reduce friction, to improve paint adhesion, to alter conductivity, to improve IR reflectivity, for ...
Nickel electroplating is a process of depositing nickel onto a metal part. Parts to be plated must be clean and free of dirt, corrosion, and defects before plating can begin. [3] To clean and protect the part during the plating process, a combination of heat treating, cleaning, masking, pickling, and etching may be used. [1]
We also know that George Richards Elkington (1801–1865), otherwise known for his patent for galvanic gilding and silver plating from 1840 patented at least one process of electrochemical coloring of metals (the American J.E .Stareck developed ten variants of his process around 1937). [10]
Sometimes the component has a conforming anode made from lead/tin or platinized titanium. A typical hard chrome vat plates at about 0.001 inches (25 μm) per hour. Some common industry specifications governing the chrome plating process are AMS 2460, AMS 2406, and MIL-STD-1501.
This is a semi-bright finish that will still have some polishing lines but they will be very dull. Carbon steel and iron are commonly polished to a #7 finish before chrome plating. A #7 finish can be made bright by color buffing with coloring compound and a cotton buff.
Chemical coloring of metals is the process of changing the color of metal surfaces with different chemical solutions. The chemical coloring of metals can be split into three types: electroplating – coating the metal surface with another metal using electrolysis. patination – chemically reacting the metal surface to form a colored oxide or ...