Search results
Results from the WOW.Com Content Network
The standard fire alarm sound used in most of North America. Coding refers to the pattern or tones a notification appliance sounds in and is controlled either by the panel or by setting jumpers or DIP switches on the notification appliances. The majority of audible notification appliances installed prior to 1996 produced a steady sound for ...
The system uses a distinctive "WHOOP" tone that was originally produced for Federal Signal's line of fire alarms. The system is tested on the second Monday of every month at 6:00pm. [6] Alaska has many Federal Signal Modulators and Eclipse 8s on their All Hazard Siren System. They sound for tsunamis as well.
This Q2B or "Q-siren" is mounted on a Pierce Platform Aerial Fire Truck owned by the City of Bellingham, WA. The Q2B siren (" Q-siren ") [ 1 ] is an electromechanical siren that is produced by the Federal Signal Corporation and is most recognizable for its sound, which is trademarked , and the look of the siren.
In the United States, the National Fire Protection Association sets standards for PASS devices in NFPA 1982. [ 1 ] The PASS device is normally used in conjunction with breathing apparatus; it is a small, battery-powered device attached to the self-contained breathing apparatus (SCBA) harness which enables the firefighter to summon help by ...
The signal that the alarm has passed: a siren sound with a constant pitch (400 Hz) repeated twice in a row for 30 seconds, with a 30-second pause between the signals (Figure 3). The alarm past signal also applies to the cancellation of the air raid warning and the disaster alarm past signal.
A fire alarm annunciator panel is located where it is accessible to fire-fighting crews, such as at building entrances/exits. The annunciator panel will indicate the system status using lamps (or LEDs), an audible warning tone, and depending on the system technology, the exact location or approximate physical location of the source of a fire ...
A fire alarm box, fire alarm call box, or fire alarm pull box is a device used for notifying a fire department of a fire or a fire alarm activation. Typically installed on street corners or on the outside of commercial buildings in urban areas, they were the main means of summoning firefighters before the general availability of telephones.
Many fire horn systems were wired to fire pull boxes that were located around a town, and this would "blast out" a code in respect to that box's location. For example, pull box number 233, when pulled, would trigger the fire horn to sound two blasts, followed by a pause, followed by three blasts, followed by a pause, followed by three more blasts.