Ad
related to: 300gsm card thickness in mm
Search results
Results from the WOW.Com Content Network
Most nations describe paper in terms of grammage—the weight in grams of one sheet of the paper measuring one square meter.. Other people, especially in the United States, describe paper in terms of pound weight—the weight in pounds per ream (500 sheets) of the paper with a given area (based on historical production sizes before trimming): for card stock, this is 20 by 26 in (508 by 660 mm ...
ISO / IEC 7810 Identification cards — Physical characteristics is an international standard that defines the physical characteristics for identification cards. [1] The characteristics specified include: Physical dimensions. Resistance to bending, chemicals, temperature, and humidity. Toxicity.
Most standard size SD cards are 2.1 mm (0.083 inches) [58] thick, with microSD versions being 1.0 mm (0.039 inches) [58] thick, compared to 1.4 mm (0.055 inches) for MMCs. The SD specification defines a card called Thin SD with a thickness of 1.4 mm, [citation needed] but they occur only rarely, as the SDA went on to define even smaller form ...
Grammage. Grammage and basis weight, in the pulp and paper industry, are the area density of a paper product, that is, its mass per unit of area. Two ways of expressing grammage are commonly used: Expressed in grams (g) per square metre (g/m 2), regardless of its thickness (caliper). [1] This is the measure used in most parts of the world.
Card family Standards organizations Varieties Entry date Maximum commercially available capacity Picture [1] Main features CompactFlash: SanDisk: I 1994 512 GB (CF5 128*2 50 bytes) Thinner (3.3 mm), flash only, now up to 512 GB, although standard goes up to 128 PB since CF 5.0 [2] II Thicker (5.0 mm), older flash, but usually Microdrives, up to ...
ISO/IEC 7813. International standard for cash cards and credit cards. ISO/IEC 7813 is an international standard codified by the International Organization for Standardization and International Electrotechnical Commission that defines properties of financial transaction cards, such as ATM or credit cards. [1]
RS-MMC. In 2004, the Reduced-Size MultiMediaCard (RS-MMC) was introduced as a smaller form factor of the MMC, with about half the size: 24 mm × 18 mm × 1.4 mm. The RS-MMC uses a simple mechanical adapter to elongate the card so it can be used in any MMC (or SD) slot. RS-MMCs are currently available in sizes up to and including 2 GB.
This dimension refers to the subrack in which the card is to be mounted, rather than the card itself. A single card is 100 mm high. Taller cards add a 133.35 mm, so that a double height card is 233.35 mm high and a triple 366.7 mm high. Enclosure heights are multiples of 3U, with the cards always 33.35 mm (1.313 in) shorter than the enclosure.
Ad
related to: 300gsm card thickness in mm