Search results
Results from the WOW.Com Content Network
Compressor blades create a pumping action by working as airfoils. In a surge or stall, blades experience an aerodynamic stall (similar to an aircraft wing stalling) and become unable to hold back the higher pressure downstream, with a resulting violent flow reversal. The flame which is normally confined in the combustion chamber may come out of ...
Diagram of a typical gas turbine jet engine. Air is compressed by the compressor blades as it enters the engine, and it is mixed and burned with fuel in the combustion section. The hot exhaust gases provide forward thrust and turn the turbines which drive the compressor blades. 1. Intake 2. Low pressure compression 3. High pressure compression ...
An example of a wind turbine, this 3 bladed turbine is the classic design of modern wind turbines Wind turbine components : 1-Foundation, 2-Connection to the electric grid, 3-Tower, 4-Access ladder, 5-Wind orientation control (Yaw control), 6-Nacelle, 7-Generator, 8-Anemometer, 9-Electric or Mechanical Brake, 10-Gearbox, 11-Rotor blade, 12-Blade pitch control, 13-Rotor hub
At take-off, the fan displaces up to 1.3 t (2,900 lb) of air per second, the jet nozzle velocity is almost 1,000 mph (450 m/s) and each high pressure turbine blade generates around 800 hp (600 kW), rotating at 12,500 rpm with their tips reaching 1,200 mph (540 m/s). [3] Rolls-Royce reports the engine is 10 dB quieter than the Trent 700. [15]
The Rolls-Royce Trent XWB is a high-bypass turbofan produced by Rolls-Royce Holdings.In July 2006, the Trent XWB was selected to exclusively power the Airbus A350. [2] The first engine was run on 14 June 2010, [3] it first flew on an A380 testbed on 18 February 2012, [4] was certified in early 2013, [5] and first flew on an A350 on 14 June 2013. [6]
A Block and bleed manifold is a hydraulic manifold that combines one or more block/isolate valves, usually ball valves, and one or more bleed/vent valves, usually ball or needle valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic system. The purpose of the ...
The turbine blades have a golden colour in this engine cutaway. A turbine blade is a radial aerofoil mounted in the rim of a turbine disc and which produces a tangential force which rotates a turbine rotor. [2] Each turbine disc has many blades. [3] As such they are used in gas turbine engines and steam turbines.
Blades move entirely due to the impact of steam on them and their profiles do not converge. This results in a steam velocity drop and essentially no pressure drop as steam moves through the blades. A turbine composed of blades alternating with fixed nozzles is called an impulse turbine, Curtis turbine, Rateau turbine, or Brown-Curtis turbine ...