Search results
Results from the WOW.Com Content Network
All Barra I6 engines are DOHC with Variable valve timing and contain 24 valves. [2] They are a development of the SOHC "Intech" I6s produced between 1998 and 2002, or the SOHC produced from 1988 to 1998, which in turn are a development of the 3.3 and 4.1 L push-rod flat-tappet I6, developed in Australia as an "Alloy Head" Crossflow in 1980, eventually in both carburetted and injected versions ...
It is differentiated from the 194/230/250 engines by a 1 + 3 ⁄ 4 inches (44.5 mm) taller block deck and relocated passenger-side engine mount. Although it had had a larger displacement than its 261-cubic-inch (4.3 L) Stovebolt predecessor it was approximately 2 inches (51 mm) shorter and 1 ⁄ 4 inch (6.4 mm) lower. [54]
[1] [2] Originally displacing 172.6 cu in (2.8 L), it was stroked to 184 cu in (3.0 L) and ultimately to 195.6 cu in (3.2 L) in 1952. This engine was redesigned as an OHV for the 1956 model year, [ 3 ] but the flathead version reemerged in 1958 as the economy engine for the "new" Rambler American and remained available through 1965. [ 3 ]
The LLV (also called Vortec 2900) is a 2.9 L; 178.3 cu in (2,921 cc) straight-4 DOHC engine produced between 2007 and 2012, with a 95.5 mm × 102 mm (3.76 in × 4.02 in) bore and a stroke. It replaced the LK5 and produced 185 hp (138 kW) at 5,600 rpm and 190 lb⋅ft (258 N⋅m) of torque at 2,800 rpm.
The 144 cu in (2.4 L) inline-six engine was first introduced in the 1960 Ford Falcon. The 144 was made from 1960 through 1964 and averaged 90 hp (67 kW) during the production run. While not known for being powerful or a stout engine, it proved to be economical and could get fairly good gas mileage for the time, up to 30 mpg ‑US (8 L/100 km ...
2017–2021 1.2 L Dragon Ti-VCT I3, naturally aspirated. Based from 1.5 L Dragon engine but with smaller piston and without balancer shaft. [2]Displacement: 1194 cc
The connecting rods used on the 4.3 L (262 cu in) are therefore unique to this engine, being 5.7 inches (140 mm) in length, but having the larger 2 + 1 ⁄ 4 inches (57.2 mm) journals. The 4.3 L (262 cu in) also used larger valves than the 229 cu in (3.8 L) V6, with a 1.94-inch (49.3 mm) intake valve and a 1 + 1 ⁄ 2-inch (38.1 mm) exhaust ...
The 361-cubic-inch (5.9 L) 361 was released in 1939 alongside the 426 and 451. The 361 was discontinued in 1949 and replaced by the 360 "Group 2" engine. The 360 and 361 shared the exact same 4 + 1 ⁄ 8 inches (100 mm) bore and 4 + 1 ⁄ 2 inches (110 mm) stroke, but the 361 used the larger "Group 3" block. It produced a maximum 136 hp @ 3000 ...