Search results
Results from the WOW.Com Content Network
Dual-ported video RAM (VRAM) is a dual-ported RAM variant of dynamic RAM (DRAM), which was once commonly used to store the Framebuffer in Graphics card, . Dual-ported RAM allows the CPU to read and write data to memory as if it were a conventional DRAM chip, while adding a second port that reads out data.
Video random-access memory (VRAM) is dedicated computer memory used to store the pixels and other graphics data as a framebuffer to be rendered on a computer monitor. [1] It often uses a different technology than other computer memory, in order to be read quickly for display on a screen.
Without knowing the clock frequency it is impossible to state if one set of timings is "faster" than another. For example, DDR3-2000 memory has a 1000 MHz clock frequency, which yields a 1 ns clock cycle. With this 1 ns clock, a CAS latency of 7 gives an absolute CAS latency of 7 ns. Faster DDR3-2666 memory (with a 1333 MHz clock, or 0.75 ns ...
Window DRAM (WRAM) is a variant of VRAM that was once used in graphics adaptors such as the Matrox Millennium and ATI 3D Rage Pro. WRAM was designed to perform better and cost less than VRAM. WRAM offered up to 25% greater bandwidth than VRAM and accelerated commonly used graphical operations such as text drawing and block fills. [70]
Normal operations resume on the rising edge of the clock after the one where CKE is sampled high. Put another way, all other chip operations are timed relative to the rising edge of a masked clock. The masked clock is the logical AND of the input clock and the state of the CKE signal during the previous rising edge of the input clock. CS chip ...
Additional clock precision in 0.25 MHz increments (to be subtracted from byte 9 maximum pixel clock rate) Bits 1–0: Maximum active pixels per line, 2-bit msb 13: Maximum active pixels per line, 8-bit lsb (no limit if 0) 14: Aspect ratio bitmap Bit 7: 4∶3 Bit 6: 16∶9 Bit 5: 16∶10 Bit 4: 5∶4 Bit 3: 15∶9 Bits 2–0: 000 = reserved 15 ...
VGA section on the motherboard in IBM PS/55. The color palette random access memory (RAM) and its corresponding digital-to-analog converter (DAC) were integrated into one chip (the RAMDAC) and the cathode-ray tube controller was integrated into a main VGA chip, which eliminated several other chips in previous graphics adapters, so VGA only additionally required external video RAM and timing ...
Clock cycles between row precharge and activate DDR4-xxxx denotes per-bit data transfer rate, and is normally used to describe DDR chips. PC4-xxxxx denotes overall transfer rate, in megabytes per second, and applies only to modules (assembled DIMMs).