Search results
Results from the WOW.Com Content Network
Making a radiograph. Industrial radiography is a modality of non-destructive testing that uses ionizing radiation to inspect materials and components with the objective of locating and quantifying defects and degradation in material properties that would lead to the failure of engineering structures.
Electron-beam processing is used in industry primarily for three product modifications: Crosslinking of polymer-based products to improve mechanical, thermal, chemical and other properties, Material degradation often used in the recycling of materials, Sterilization of medical and pharmaceutical goods. [4]
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation (particle radiation and high-energy electromagnetic radiation), [1] especially for environments in outer space (especially beyond low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear ...
This is a series of tubes horizontal/ vertical hairpin type connected at ends (with 180° bends) or helical in construction. The radiant coil absorbs heat through radiation. They can be single pass or multi pass depending upon the process-side pressure drop allowed. The radiant coils and bends are housed in the radiant box.
Those coatings qualified as Interior Radiation Control Coatings must show a thermal emittance of 0.25 or less. This means that an IRCCS will block 75% or more of the radiant heat transfer. These low "E" coatings were originally developed in 1978 at the Solar Energy Corporation (SOLEC) in Princeton, New Jersey for use in tubular evacuated solar ...
The two most notable professional bodies are: The American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) was founded in 1894.; The British Chartered Institution of Building Services Engineers (CIBSE) was founded in 1976 and received a Royal Charter in the United Kingdom, formally recognising building services engineering as a profession.
Radiation exposure can be managed by a combination of these factors: Time: Reducing the time of an exposure reduces the effective dose proportionally. An example of reducing radiation doses by reducing the time of exposures might be improving operator training to reduce the time they take to handle a radioactive source.
An X-ray generator generally contains an X-ray tube to produce the X-rays. Possibly, radioisotopes can also be used to generate X-rays. [1]An X-ray tube is a simple vacuum tube that contains a cathode, which directs a stream of electrons into a vacuum, and an anode, which collects the electrons and is made of tungsten to evacuate the heat generated by the collision.