Search results
Results from the WOW.Com Content Network
A standard of "nitrite as N" set at 1.4 mg/L equals a nitrite ion concentration of 4.6 mg/L. This is an apparent difference of nearly threefold. ... 0, 05 mg/L 0.050 ...
The tonne (t) is an SI-compatible unit of mass equal to a megagram (Mg), or 10 3 kg. The unit is in common use for masses above about 10 3 kg and is often used with SI prefixes. For example, a gigagram ( Gg ) or 10 9 g is 10 3 tonnes, commonly called a kilotonne .
At 100 °C (212 °F; 373 K), saturated sodium chloride brine is about 28% salt by weight. At 0 °C (32 °F; 273 K), brine can only hold about 26% salt. [ 3 ] At 20 °C one liter of water can dissolve about 357 grams of salt, a concentration of 26.3%.
A river or lake water with a salinity of around 70 mg/L will typically have a specific conductivity at 25 °C of between 80 and 130 μS/cm. The actual ratio depends on the ions present. [14] The actual conductivity usually changes by about 2% per degree Celsius, so the measured conductivity at 5 °C might only be in the range of 50–80 μS/cm.
Sodium hypochlorite can also be used for point-of-use disinfection of drinking water, [40] taking 0.2–2 mg of sodium hypochlorite per liter of water. [41] Dilute solutions (50 ppm to 1.5%) are found in disinfecting sprays and wipes used on hard surfaces. [42] [43]
The conversion of conductivity (in μS/cm) to the total dissolved solids (in mg/kg) depends on the chemical composition of the sample and can vary between 0.54 and 0.96. Typically, the conversion is done assuming that the solid is sodium chloride; 1 μS/cm is then equivalent to about 0.64 mg of NaCl per kg of water.
The sodium chloride ions disrupt this electrical double layer, causing coagulation to occur. The coagulation of gold sol results in an increase in particle size, indicated by a colour change from red to blue or purple. The higher the gold number, the lower the protective power of the colloid, because a greater amount of colloid is required to ...
Sodium dodecyl sulfate (SDS) or sodium lauryl sulfate (SLS), sometimes written sodium laurilsulfate, is an organic compound with the formula CH 3 (CH 2) 11 OSO 3 Na and structure H 3 C−(CH 2) 11 −O−S(=O) 2 −O − Na +. It is an anionic surfactant used in many cleaning and hygiene products. This compound is the sodium salt of the 12 ...