Search results
Results from the WOW.Com Content Network
A log splitter is a piece of machinery or equipment used for splitting firewood from softwood or hardwood logs that have been pre-cut into sections (rounds), usually by chainsaw or on a saw bench. Many log splitters consist of a hydraulic pump or electric motor which then powers a hydraulic or electrical rod and piston assembly.
A firewood processor in Russia Firewood Processor in USA. A firewood processor is a machine designed to cut and split firewood with minimal manual handling of the logs. There are typically four main parts of the machine, each dedicated to a separate function.
A hydraulic debarker is a machine removing bark from wooden logs by the use of water under a pressure of 700 kilopascals (100 pounds per square inch) or greater. [1] Hydraulic debarking can reduce soil and rock content of bark, but may increase the water content.
They are usually driven by hydraulic power supplied from the surface and operated by commercial divers using surface-supplied diving equipment. Underwater chainsaw cutting may also be used by public safety divers. [30] Hydraulic chainsaws can be used to cut wood, concrete, brick and steel if the appropriate chain is used.
A bucksaw is a hand-powered frame saw [1] similar to bow saw and generally used with a sawbuck [2] to cut logs or firewood to length . Modern bucksaws usually have a metal frame ("H" [3] or C-shaped) and a removable blade with coarse teeth held in tension by the frame. Lightweight portable or foldable models used for camping or back-packing are ...
Denison Hydraulics is a publicly traded U.S.-based company (Stock Symbol:DENHY) that manufactures industrial hydraulic fluid power systems (hydraulic pumps, motors, valves and engineered systems [1]) and components and is headquartered in Marysville, Ohio. Denison is owned by Parker Hannifin.
A splitter is a stationary blade of similar thickness to the rotating saw blade mounted behind it to prevent a board from pinching inward into the saw kerf and binding on the saw blade, potentially causing a dangerous kickback. [7] Like a riving knife, its thickness should be greater than the body of the saw blade but thinner than its kerf. [7]
Drive mechanisms can be a single v-belt, a serpentine belt or multiple v-belts. Hybrid saws have a 1.5-or-2 hp (1.1-or-1.5 kW) motor and thus the ability to run on a standard 15- or 20-ampere 120-volt North American household circuit, while a cabinet saw's 3 hp (2.2 kW) or larger motor requires a 240-volt supply.