Search results
Results from the WOW.Com Content Network
By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.
When using "hand in" to convert to hands and inches, the rounded hands and inches values are equivalent, and use the same fraction, if any. Special rounding of the inches value only occurs when "hand in" is the output.
The United States adopted the conversion factor 1 metre = 39.37 inches by an act in 1866. [30] In 1893, Mendenhall ordered the physical realization of the inch to be based on the international prototype metres numbers 21 and 27, which had been received from the CGPM, together with the previously adopted conversion factor. [31]
The most common twenty-foot container occupies a space 20 feet (6.1 m) long, 8 feet (2.44 m) wide, and 8 feet 6 inches (2.59 m) high, with an allowance externally for the corner castings; the internal volume is 1,172 cubic feet (33.2 m 3). However, both 9-foot-6-inch-tall (2.90 m) High cube and 4-foot-3-inch (1.30 m) half height containers are ...
A 50 m × 25 m (164 ft × 82 ft) Olympic swimming pool, built to the FR3 minimum depth of 2 metres (6.6 ft) would hold 2,500 m 3 (660,000 US gal). The US National Institute of Standards and Technology (NIST) defines the Olympic swimming pool as 1 million litres, which is the approximate volume of the smaller FR2 pool.
The scale is a value or expression that is used as a factor to convert a value to its corresponding base unit. Commas may be used as a thousand separator (e.g. 1,000,000) or e notation may be used (e.g. 1e6). Fractions should be used when required for exactness (e.g. 1/12). Extra
This property also makes it straightforward to represent a timestamp as a fractional day, so that 2024-12-08.54321 can be interpreted as five decimal hours, 43 decimal minutes and 21 decimal seconds after the start of that day, or a fraction of 0.54321 (54.321%) through that day (which is shortly after traditional 13:00).
Lux meter for measuring illuminance, i.e. incident luminous flux per unit area; Luminance meter for measuring luminance, i.e. luminous flux per unit area and unit solid angle; Light meter, an instrument used to set photographic exposures. It can be either a lux meter (incident-light meter) or a luminance meter (reflected-light meter), and is ...