Search results
Results from the WOW.Com Content Network
A smog check inspection is performed by a station that has been licensed by the California Bureau of Automotive Repair (BAR). Depending on the situation, the owner may be required to take the vehicle to one of the following types of smog check stations: Test-only station, one that can perform the smog check test, but cannot make repairs.
Striped: Both safety and emissions testing required. In the United States, vehicle safety inspection and emissions inspection are governed by each state individually. Fifteen states have a periodic (annual or biennial) safety inspection program, while Maryland requires a safety inspection and Alabama requires a VIN inspection on sale or transfer of vehicles which were previously registered in ...
Test cycles specify the conditions under which the engine or vehicle is operated during the emission test. There are many different test cycles issued by various national and international governments and working groups. [1] Specified parameters in a test cycle include a range of operating temperature, speed, and load. Ideally these should ...
Smog test results: Some states require vehicle owners to get a smog test every year to check the car’s emissions. Drivers who live in these states should also ask the seller for the most recent ...
The California ARB standard for light vehicle emissions is a regulation of equipment first, with verification of emissions second. The property owner of the vehicle is not permitted to modify, improve, or innovate solutions in order to pass a true emissions-only standard set for their vehicle driven on public highways.
The Noack volatility test, named after Kurt Noack, [1] determines the evaporation loss of lubricants in high-temperature service. This test is standardized as ASTM D5800. [2] In this test, a sample is heated at 250 °C for 60 minutes with a constant flow of air over it. The weight fraction lost is the result for the Noack volatility test.
A 10W-30 oil must pass the SAE J300 viscosity grade requirements for both 10W and 30, and all limitations placed on the viscosity grades, such as the requirement that a 10W oil must fail the 5W requirements. Viscosity index improvers (VIIs) are special polymer additives added to oil, usually to improve cold weather performance in passenger ...
The gel point of petroleum products is the temperature at which the liquids gel so they no longer flow by gravity or can be pumped through fuel lines. This phenomenon happens when the petroleum product reaches a low enough temperature to precipitate interlinked paraffin wax crystals throughout the fluid .