Search results
Results from the WOW.Com Content Network
During the times of combo (CD-RW/DVD-ROM) drives, an additional speed rating (e.g. the 16× in 52×/32×/52×/16×) is designated for DVD-ROM media reading operations. For DVD writer drives, Blu-ray Disc combo drives, and Blu-ray Disc writer drives, the writing and reading speed of their respective optical media are specified in its retail box ...
The DVD and Blu-ray discs hold a higher capacity of data, so reading or writing those discs in the same 74-minute time-frame requires a higher data transfer rate. Drive speed can be limited intentionally to reduce noise from the drive or slow down ripping , such as the firmware component Riplock .
The PCA in DVD+R has a length of 32768 sectors, compared to the 7088 of DVD-R. In the PCA, which is located close to the inner edge of the disc, a 15-step procedure is carried out to calibrate (vary the power of) the disc drive's laser before every and during writing, to allow for small differences between discs and drives.
The data are stored on the disc with a laser or stamping machine, and can be accessed when the data path is illuminated with a laser diode in an optical disc drive that spins the disc at speeds of about 200 to 4,000 RPM or more, depending on the drive type, disc format, and the distance of the read head from the center of the disc (outer tracks ...
CD/DVD copy protection is a blanket term for various methods of copy protection for CDs and DVDs. Such methods include DRM, CD-checks, Dummy Files, illegal tables of contents, over-sizing or over-burning the CD, physical errors and bad sectors. Many protection schemes rely on breaking compliance with CD and DVD standards, leading to playback ...
Some high-speed CD and DVD drives can use CAV. [specify] It allows for shorter access times because the rotation speed (angular velocity) does not need to be changed when the laser seeks across the disc, similarly to the magnetic head of a hard disk drive. With a given angular (rotation) speed, the linear speed at the outermost track is nearly ...
If the DVD burner recognizes the discs it means that the disc has been tested by the drive manufacturer to achieve the best possible burn using an optimal write strategy. The strategy is stored in the firmware. Writing to a disc with no MID code or a code that is not recognized can result in inaccurate recording and data read-back problems.
An optical disc drive is a device in a computer that can read CD-ROMs or other optical discs, such as DVDs and Blu-ray discs. Optical storage differs from other data storage techniques that make use of other technologies such as magnetism , such as floppy disks and hard disks , or semiconductors , such as flash memory .