Search results
Results from the WOW.Com Content Network
Film speed is used in the exposure equations to find the appropriate exposure parameters. Four variables are available to the photographer to obtain the desired effect: lighting, film speed, f-number (aperture size), and shutter speed (exposure time). The equation may be expressed as ratios, or, by taking the logarithm (base 2) of both sides ...
To photograph outdoor night sports with an ISO 400–speed imaging medium, search Table 2 for "Night sports" (which has an EV of 9 for ISO 100), and add 2 to get EV 400 = 11. For lower ISO speed, decrease the exposure values (increase the exposures) by the number of exposure steps by which the speed is less than ISO 100.
Sunlit subject shot on a digital camera set to ISO 100, exposed at f/8 at 1/400 second which is the same exposure value as f/16 for 1/100 second, the recommended "sunny 16" exposure In photography, the sunny 16 rule (also known as the sunny f /16 rule ) is a method of estimating correct daylight exposures without a light meter .
Tri-X 400 is the more common of the two, available in 24- and 36-exposure rolls of 35 mm and rolls of 120 as well as 50 and 100 ft bulk rolls of 35 mm. Tri-X 320 is available in 4×5", 5×7", and 8×10" sheets. Tri-X 400 is usually rated at ISO 400 when processed in standard developers and remains among the fastest black and white films today.
An approximately correct exposure will be obtained on a sunny day using ISO 100 film, an aperture of f /16 and a shutter speed of 1/100 of a second. This is called the sunny 16 rule : at an aperture of f /16 on a sunny day, a suitable shutter speed will be one over the film speed (or closest equivalent).
The CAS code shows this is (top row) ISO 125 film, (bottom row) 24 exposures, +3/−1 f-stop exposure tolerance. The DX barcode reads 017563, showing DX number 109-12, 24 exposures. DX ( D igital inde X ) encoding is a standard for marking 35 mm and APS photographic film and film cartridges, originally introduced by Kodak in 1983.
A roll of 400 speed Kodak 35 mm film. Film speed describes a film's threshold sensitivity to light. The international standard for rating film speed is the ISO scale, which combines both the ASA speed and the DIN speed in the format ASA/DIN. Using ISO convention film with an ASA speed of 400 would be labeled 400/27°. [29]
For example, an EV of 10 may be achieved with an aperture of f / 2.8 and a shutter speed of 1/125 s. The same exposure is achieved by doubling the aperture area to f / 2 and halving the exposure time to 1/250 s, or by halving the aperture area to f / 4 and doubling the exposure time to 1/60 s; in each case the response of the film is expected ...