Search results
Results from the WOW.Com Content Network
A weight-distributing hitch is a "load leveling" hitch. It is a hitch setup mounted on the tow vehicle that uses spring bars and chains under tension to distribute part of the trailer's hitch weight from the towing vehicle's rear axle to the towing vehicle's front axle and to the trailer's axle(s). It can help reduce trailer sway and hop.
The most common drawbar configuration for heavy vehicles is an A-frame drawbar at the front of a full trailer that connects to a tow coupling on a hauling vehicle [1] On heavy vehicles, the drawbar is coupled using a drawbar eye , typically of 40 mm or 50 mm diameter, connected to a bolt and pin coupling.
In Canada, steel I-beams are now commonly specified using the depth and weight of the beam in metric terms. For example, a "W250x33" beam is approximately 250 millimetres (9.8 in) in depth (height of the I-beam from the outer face of one flange to the outer face of the other flange) and weighs approximately 33 kg/m (22 lb/ft; 67 lb/yd). [ 8 ]
The first modular self-propelled trailers were built in the 1970s. In the early 1980s, heavy haulage company Mammoet [6] refined the concept into the form seen today. [7] They set the width of the modules at 2.44 m, so the modules would fit on an ISO container flatrack. They also added 360° steering. [8]
In trucking, a bogie is the subassembly of axles and wheels that supports a semi-trailer, whether permanently attached to the frame (as on a single trailer) or making up the dolly that can be hitched and unhitched as needed when hitching up a second or third semi-trailer (as when pulling doubles or triples).
An axlebox, also known as a journal box in North America, is the mechanical subassembly on each end of the axles under a railway wagon, coach or locomotive; it contains bearings and thus transfers the wagon, coach or locomotive weight to the wheels and rails; the bearing design is typically oil-bathed plain bearings on older rolling stock, or roller bearings on newer rolling stock.
Typically, it is written in the form x/y, where x is the percentage of weight in the front, and y is the percentage in the back. In a vehicle which relies on gravity in some way, weight distribution directly affects a variety of vehicle characteristics, including handling , acceleration , traction , and component life.
A schematic representation of the production process of a castellated beam. A castellated beam is a beam style where an I-beam is subjected to a longitudinal cut along its web following a specific pattern. The purpose is to divide and reassemble the beam with a deeper web by taking advantage of the cutting pattern. [1]