Search results
Results from the WOW.Com Content Network
At 20 °C and 101.325 kPa, dry air has a density of 1.2041 kg/m 3. At 70 °F and 14.696 psi, dry air has a density of 0.074887 lb/ft 3. The following table illustrates the air density–temperature relationship at 1 atm or 101.325 kPa: [citation needed]
Standard sea-level conditions (SSL), [1] also known as sea-level standard (SLS), defines a set of atmospheric conditions for physical calculations.The term "standard sea level" is used to indicate that values of properties are to be taken to be the same as those standard at sea level, and is done to define values for use in general calculations.
Since 1982, STP has been defined as a temperature of 273.15 K (0 °C, 32 °F) and an absolute pressure of exactly 1 bar (100 kPa, 10 5 Pa). NIST uses a temperature of 20 °C (293.15 K, 68 °F) and an absolute pressure of 1 atm (14.696 psi, 101.325 kPa). [3] This standard is also called normal temperature and pressure (abbreviated as NTP).
K) specific gas constant for dry air ρa = P_a / (Rs_a * Tair) return ρa end # Wet air density ρ [kg/m3] # Tair air temperature in [Kelvin] # P absolute atmospheric pressure [Pa] function wet_air_density (RH, Tair, P) es = water_vapor_saturated_pressure (Tair, P) e = es * RH / 100 ρv = water_vapor_density (e, Tair) ρa = dry_air_density (P-e ...
In case of air, using the perfect gas law and the standard sea-level conditions (SSL) (air density ρ 0 = 1.225 kg/m 3, temperature T 0 = 288.15 K and pressure p 0 = 101 325 Pa), we have that R air = P 0 /(ρ 0 T 0) = 287.052 874 247 J·kg −1 ·K −1.
The table below displays densities and specific volumes for various common substances that may be useful. The values were recorded at standard temperature and pressure, which is defined as air at 0 °C (273.15 K, 32 °F) and 1 atm (101.325 kN/m 2, 101.325 kPa, 14.7 psia, 0 psig, 30 in Hg, 760 torr). [4]
The amount of mass that can be lifted by hydrogen in air per unit volume at sea level, equal to the density difference between hydrogen and air, is: (1.292 - 0.090) kg/m 3 = 1.202 kg/m 3. and the buoyant force for one m 3 of hydrogen in air at sea level is: 1 m 3 × 1.202 kg/m 3 × 9.8 N/kg= 11.8 N
EU directives on gas quality use 15 °C in accordance with ISO 13443 and ISO 6976. , is the density of air at standard conditions, is the molar mass of the gas and is the molar mass of air which is about 28.96 kg/kmol. . The Wobbe index is used to compare the combustion energy output of different composition fuel gases in an appliance (fire ...