Search results
Results from the WOW.Com Content Network
Modern ADSL filter/splitter (left) and filter (right). ADSL works by using spectrum above the band used by voice telephone calls. [1] With a DSL filter, often called splitter, the frequency bands are isolated, permitting a single telephone line to be used for both ADSL service and telephone calls at the same time.
A DSL filter (also DSL splitter or microfilter) is an analog low-pass filter installed between analog devices (such as telephones or analog modems) and a plain old telephone service (POTS) line. The DSL filter prevents interference between such devices and a digital subscriber line (DSL) service connected to the same line.
Digital subscriber line (DSL; originally digital subscriber loop) is a family of technologies that are used to transmit digital data over telephone lines. [1] In telecommunications marketing, the term DSL is widely understood to mean asymmetric digital subscriber line (ADSL), the most commonly installed DSL technology, for Internet access.
Remove any splitters, phone line surge protectors, fax or answering machines, or other devices as they may affect your modem’s ability to connect. • Restart your PC and try connecting again. • Try using a different access number, if available:
This splitter separates the DSL and voice bands. Thus the customer will have a dial tone, which allows them to use the telephone line as a regular land line while they are using it to access the Internet on their computer. A cable carrying both services runs from the splitter to the cable head, where it continues on to the customer on outside ...
iSCSI—Internet Small Computer System Interface; ISDN—Integrated Services Digital Network; ISO—International Organization for Standardization;
If you're using broadband (cable) internet and you can't connect, try the following troubleshooting steps in the order listed until you get up and running again. 1. Check if you can visit other sites with a different browser - If you can go to another site, the problem may be associated the browser you're using.
Passive optical networks do not use electrically powered components to split the signal. Instead, the signal is distributed using beam splitters. Each splitter typically splits the signal from a single fiber into 16, 32, or up to 256 fibers, depending on the manufacturer, and several splitters can be aggregated in a single cabinet.