Ad
related to: cosworth engines list of parts made
Search results
Results from the WOW.Com Content Network
The new engine would become the standard design and manufacturers could opt to use whole units, construct their own from designs provided by Cosworth, or produce their own engine with the caveat that it be limited to the same power as the new "standard" engine. In 2010 Cosworth returned as the engine supplier for Williams and three new teams ...
Variants of this engine were also used in other categories of racing, including CART, Formula 3000 and sports car racing. The engine is a 90°, 2,993 cc V8 with a bore and stroke of 85.67 × 64.90 mm (3.373 × 2.555 in). It reliably produced over 400 bhp, specifically reaching 408 bhp at 9,000 rpm, and 270 ft⋅lbf (370 N⋅m) of torque at ...
The Cosworth ED (also called the Ford ED) was an eight-cylinder naturally aspirated engine designed by Cosworth for Formula 1, which was used at the beginning of the second 3.0-litre era from 1995 to 1997. It was purely a customer engine for smaller teams and in this function replaced the HB used until 1994, to which it was technically related.
One of the most successful and longest-lived projects of Cosworth has been its Indy car engine program. In 1975; Cosworth developed the DFX, by destroking the engine to 2.65 L and adding a turbocharger, the DFX became the standard engine to run in IndyCar racing, ending the reign of the Offenhauser, and maintaining that position until the late 1980s.
In 2010 Cosworth returned as the engine supplier for Williams and three new teams; Hispania Racing, Lotus Racing and Virgin Racing. The CA2010 is the same 2.4-litre V8 base of the CA2006 used by Williams, but has been re-tuned for the then-mandated 18,000 rpm limit required on all engines, down from its original 20,000 rpm implementation. [ 7 ]
In Formula 1, no engine comes close to matching the success of this 3.0-liter V-8. The engine was so good it became critical to the success of the sport; F1 might not have survived without it.
The HB was the first engine Cosworth designed specifically for the 3.5 liter Formula One. Geoff Goddard and John Hancock were responsible for its development. Unlike the DFR, Brian Hart was not involved in the design. The development of the HB took place in close cooperation with Benetton's technical director at the time, Rory Byrne.
Escort Cosworth engine YBT T34. Maximum power officially from Ford was 227 PS (224 bhp; 167 kW) at 6,250 rpm and 304 N⋅m; 224 lbf⋅ft (31 kg⋅m) of torque at 3,500 rpm [7] on 95 RON petrol and a max speed of 232 km/h (144 mph) (GPS) and 237 km/h (147 mph) without the big rear wing, while 0–100 km/h (62 mph) takes 5.7 sec. Standard boost from Garrett AiResearch T3/T04B turbocharger was 0. ...
Ad
related to: cosworth engines list of parts made