Search results
Results from the WOW.Com Content Network
Typical live use of a multicore (thick cable on stage) Multicores usually create a link between the stage and sound desk, or live room and control room.When used in sound reinforcement, the multicore cable runs from the stage box or microphone splitter to the front-of-house sound desk, where it connects to a mixing console. [2]
IEEE 1394 (branded "FireWire") is a digital data transfer protocol commonly used for digital cameras (common on MiniDV tape camcorders), but also used for computer data and audio data transfers. Unlike Point-to-Point connections listed above, IEEE 1394 is able to host several signals on the same wire, with the data delivered and shown on the ...
Most commonly used on professional microphones, the common 3-pin XLR connector is a standard for transferring balanced audio among professional audio equipment. The 4-pin XLR is the standard connector for intercom headsets, such as systems made by Clear-Com and Telex. Two pins are used for the mono headphone signal and two pins for the ...
A wireless microphone transmits the audio as a radio or optical signal rather than via a cable. It usually sends its signal using a small radio transmitter to a nearby receiver connected to the sound system, but it can also use infrared waves if the transmitter and receiver are within sight of each other.
Apple proprietary. Combines Analog VGA out, stereo analog audio out, analog microphone in, S-video capture in, Apple desktop bus interface. Proprietary connector used on Apple Macintosh Centris computers, and the Apple AudioVision 14 Display. An attempt by Apple to deal with cable clutter, by combining five separate cables from computer to monitor.
Many small video cameras, laptops, recorders and other consumer devices use a 3.5 mm microphone connector for attaching a microphone to the system. These fall into three categories: [citation needed] Devices that use an unpowered microphone: usually a cheap dynamic or piezoelectric microphone. The microphone generates its own voltage and needs ...
The standard [29] colors for the various signals are shown in the table below; however, beyond 7.1 audio, the standard has degraded to a more general white/yellow, red/blue, and green/yellow color scheme for each cable respectively. Stereo audio applications use either black and red, grey and red, or white and red RCA connectors; in all three ...
A Shure FP24 preamp's mono XLR line outputs connected to an Edirol R-09 recorder's 3.5mm stereo jack line input, using a Y-cable. This is an example of consolidating connectors, as described below. A Y-cable, Y cable, or splitter cable is a cable with three ends: one common end and two other ends. The Y-cable can resemble the Latin letter "Y".