Search results
Results from the WOW.Com Content Network
Trap with copper drain pipe at underside of firestop packing in two-hour fire-resistance rated concrete floor slab Typical P-trap. Maintaining the water seal is critical to trap operation; traps might dry out, and poor venting can suction or blow water out of the traps. This is usually avoided by venting the drain pipes downstream of the trap ...
Concrete sealers are applied to concrete to protect it from surface damage, corrosion, and staining. They either block the pores in the concrete to reduce absorption of water and salts or form an impermeable layer which prevents such materials from passing.
Waterstops are manufactured from a variety of materials depending on the functionality and their intended use. The most common types are: Waterstops made from extruded plastics such as flexible polyvinyl chloride PVC, polyethylene (PE) or thermoplastic vulcanized rubber (TPV); formed metal such as stainless steel, copper, or carbon steel - with or without polymeric coatings; extruded ...
A 200,000 imperial gallons (910,000 L; 240,000 US gal) water tank with 15 distribution points, and a second 70 feet (21 m) turntable Thornaby Tees Yard under construction All the structures were made from pre-stressed and pre-formed concrete pieces, and when the shed opened in June 1958 with shed code (51L), the total construction had been ...
An elevated water tank, also known as a water tower, will create a pressure at the ground-level outlet of 1 kPa per 10.2 centimetres (4.0 in) or 1 psi per 2.31 feet (0.70 m) of elevation. Thus a tank elevated to 20 metres creates about 200 kPa and a tank elevated to 70 feet creates about 30 psi of discharge pressure, sufficient for most ...
Self-leveling silicone firestop system used around pipe through-penetration in a two-hour fire-resistance rated concrete floor assembly. Sealant is a substance used to block the passage of fluids through openings in materials, [1] a type of mechanical seal.
Ferrocement or ferro-cement [1] is a system of construction using reinforced mortar [2] or plaster (lime or cement, sand, and water) applied over an "armature" of metal mesh, woven, expanded metal, or metal-fibers, and closely spaced thin steel rods such as rebar. The metal commonly used is iron or some type of steel, and the mesh is made with ...
The presence of water in carbonated concrete is necessary to lower the pH of concrete pore water around rebar and to depassivate the carbon steel surface at low pH. Water is central to corrosion processes. Without water, the steel corrosion is very limited and rebar present in dry carbonated concrete structures, or components, not affected by ...