Search results
Results from the WOW.Com Content Network
The vacuum distillation column internals must provide good vapor–liquid contacting while, at the same time, maintaining a very low-pressure increase from the top of the column top to the bottom. Therefore, the vacuum column uses distillation trays only where products are withdrawn from the side of the column (referred to as side draws).
Image 1: Typical industrial distillation towers Image 2: A crude oil vacuum distillation column as used in oil refineries. Continuous distillation, a form of distillation, is an ongoing separation in which a mixture is continuously (without interruption) fed into the process and separated fractions are removed continuously as output streams.
A simple short path vacuum distillation apparatus can be used for bulb-to-bulb distillation. 1: Still pot with stirrer bar/anti-bumping granules 2: Cold finger - Condenser with maximum surface to condense most of the vapour. 3: Cooling water outlet 4: cooling water inlet 5: Vacuum Adapter 6: Receiving Flask.
Spinning cone columns are used in a form of low temperature vacuum steam distillation to gently extract volatile chemicals from liquid foodstuffs while minimising the effect on the taste of the product.
Large-scale, industrial vacuum distillation column [51] This packing material can either be random or dumped packing (25–76 millimetres (1–3 in) wide) such as Raschig rings or structured sheet metal. Liquids tend to wet the surface of the packing and the vapors pass across this wetted surface, where mass transfer takes place. Unlike ...
A fractionating column or fractional column is equipment used in the distillation of liquid mixtures to separate the mixture into its component parts, or fractions, based on their differences in volatility. Fractionating columns are used in small-scale laboratory distillations as well as large-scale industrial distillations.
A Perkin triangle is a specialized apparatus for the distillation of air-sensitive materials. Some compounds have high boiling points and are sensitive to air. A simple vacuum distillation system can be used, whereby the vacuum is replaced with an inert gas after the distillation is complete. However, this is a less satisfactory system if one ...
The pressure at the top is maintained at 1.2–1.5 atm [2] so that the distillation can be carried out at close to atmospheric pressure, and therefore it is known as the atmospheric distillation column. [3] The vapors from the top of the column are a mixture of hydrocarbon gases and naphtha, at a temperature of 120 °C–130 °C.