Search results
Results from the WOW.Com Content Network
Engine flooding was a common problem with carbureted cars, but newer fuel-injected ones are immune to the problem when operating within normal tolerances. Flooding usually occurs during starting, especially under cold conditions or because the accelerator has been pumped. It can also occur during hot starting; high temperatures may cause fuel ...
The Chevrolet 90° V6 family of V6 engines began in 1978 with the Chevrolet 200 cu in (3.3 L) as the base engine for the all new 1978 Chevrolet Malibu.The original engine family was phased out in early 2014, with its final use as the 4.3 L (262 cu in) V6 engine used in Chevrolet and GMC trucks and vans.
In cars, carburetor heat may be controlled automatically (e.g. by a wax-pellet driven flap in the air intake) or manually (often by rotating the air cleaner cover between 'summer' and 'winter' settings), with use both of "heat stove" type systems, and electric-filament booster elements directly attached to the carb or TBI module.
Valve seats are often formed by first press-fitting an approximately cylindrical piece of a hardened metal alloy, such as Stellite, into a cast depression in a cylinder head above each eventual valve stem position, [1] and then machining a conical-section surface into the valve seat that will mate with a corresponding conical section of the ...
Autolite 4300A Carburetor. The Autolite 4300 was a four-barrel (four venturi) carburetor manufactured by Autolite in multiple variants from 1967 through 1974. Used by both Ford and AMC, it was produced as an emissions-compliant replacement for the previous Autolite 4100 model, and was superseded by the Motorcraft 4350.
Float chamber (left) of an updraught carburettor, showing the float (4) and valve (5). A float chamber is a device for automatically regulating the supply of a liquid to a system. It is most typically found in the carburettor of an internal combustion engine , where it automatically meters the fuel supply to the engine.
Two-barrel downdraft Holley 2280 carburetor Cross-sectional schematic. A carburetor (also spelled carburettor or carburetter) [1] [2] [3] is a device used by a gasoline internal combustion engine to control and mix air and fuel entering the engine. [4]
In 1981, a Delco Electronics ECU was used by several Chevrolet and Buick engines to control their fuel system (a closed-loop carburetor) and ignition system. [10] By 1988, Delco Electronics was the leading producer of engine management systems, producing over 28,000 ECUs per day.