Search results
Results from the WOW.Com Content Network
The particular take-off distance required may be shorter than the available runway length. In this case a lower thrust may be used. Lower thrust settings increase engine life and reduce maintenance costs. The take-off thrust available from a civil engine is a constant value up to a particular ambient temperature.
The required take-off thrust was 14,500 lb which would normally be set by advancing the thrust levers to give an EPR reading of 2.04. Due to EPR probe icing the value set, i.e. 2.04, was erroneous and actually equivalent to 1.70 which gave an actual thrust of only 10,750 lb.
Aircraft engine performance refers to factors including thrust or shaft power for fuel consumed, weight, cost, outside dimensions and life. It includes meeting regulated environmental limits which apply to emissions of noise and chemical pollutants, and regulated safety aspects which require a design that can safely tolerate environmental hazards such as birds, rain, hail and icing conditions.
The delta-v required to return from Near-Earth objects is usually quite small, sometimes as low as 60 m/s (200 ft/s), with aerocapture using Earth's atmosphere. [10] However, heat shields are required for this, which add mass and constrain spacecraft geometry. The orbital phasing can be problematic; once rendezvous has been achieved, low delta ...
The thrust efficiency is the actual thrust as percentage of this. If, e.g., solar power is used, this restricts a {\displaystyle a} ; in the case of a large v e {\displaystyle v_{\text{e}}} the possible acceleration is inversely proportional to it, hence the time to reach a required delta-v is proportional to v e {\displaystyle v_{\text{e ...
A cold gas thruster (or a cold gas propulsion system) is a type of rocket engine which uses the expansion of a (typically inert) pressurized gas to generate thrust.As opposed to traditional rocket engines, a cold gas thruster does not house any combustion and therefore has lower thrust and efficiency compared to conventional monopropellant and bipropellant rocket engines.
TSFC or SFC for thrust engines (e.g. turbojets, turbofans, ramjets, rockets, etc.) is the mass of fuel needed to provide the net thrust for a given period e.g. lb/(h·lbf) (pounds of fuel per hour-pound of thrust) or g/(s·kN) (grams of fuel per second-kilonewton). Mass of fuel is used, rather than volume (gallons or litres) for the fuel ...
A variety of other rocket propulsion methods, such as ion thrusters, give much higher specific impulse but with much lower thrust; for example the Hall-effect thruster on the SMART-1 satellite has a specific impulse of 1,640 s (16.1 km/s) but a maximum thrust of only 68 mN (0.015 lbf). [45]