Search results
Results from the WOW.Com Content Network
CCS1 (Combined Charging System Combo 1) plug as used in North America. It is an extension of the J1772 standard AC charging connector. CCS Combo 1 vehicle inlet showing the J1772 and the two DC fast-charging pins Connectors: Incomplete Combo 2 (left) showing the two large direct current (DC) pins below, while the four alternating current (AC) pins for neutral and three-phase are removed, while ...
The yellow 2P+E 16 A version carrying 115 V is used extensively on the London Underground railway system to power temporary usage of heavy-duty fans; it is also frequently used by tradesmen within the UK, built into a portable transformer box that is powered from a standard 13 A 240 V mains supply, to run heavy-duty power-tools designed to ...
Clipsal 492/32 DC plug, not wired. In Australia, a T-configuration Clipsal socket is used for extra-low voltage DC power outlets, such as in stand-alone power systems (SAPS) or on boats, in order to prevent accidental connections of 12 V appliances into 240 V socket-outlets. [11] This connector is also used for temporary equipment in emergency ...
All NEMA 6 devices are three-wire grounding devices (hot-hot-ground) used for 208 and 240 V circuits and rated for 250 V maximum, with the 6-15, 6-20 and 6-30 being grounding versions of the 2-15, 2-20 and 2-30, respectively. The 6-15 resembles the 5-15, but with collinear horizontal pins, spaced 23 ⁄ 32 in (18.3 mm) center-to-center. The 20 ...
In 1999, the Commissione Italiana Veicoli Elettrici Stradali [] (Italian electric vehicles association, CIVES) approached Scame to design an interface specifically for charging electric vehicles, [2] which led to a system that delivered single-phase AC line voltage through what is now called a Type 3A female socket via an adaptor that plugged into a standard 230 V AC outlet. [3]
A variety of different kinds of IEC 60320 plugs and sockets. IEC 60320 Appliance couplers for household and similar general purposes [1] is a set of standards from the International Electrotechnical Commission (IEC) specifying non-locking connectors for connecting power supply cords to electrical appliances of voltage not exceeding 250 V (a.c.) and rated current not exceeding 16 A. [1 ...
Case A: any charger connected to the mains (the mains supply cable is usually attached to the charger) usually associated with modes 1 or 2. Case B: an on-board vehicle charger with a mains supply cable that can be detached from both the supply and the vehicle – usually mode 3. Case C: DC dedicated charging station. The mains supply cable may ...
An intake ramp is a rectangular, plate-like device within the air intake of a jet engine, designed to generate a number of shock waves to aid the inlet compression process at supersonic speeds. [1] The ramp sits at an acute angle to deflect the intake air from the longitudinal direction. [ 2 ]