Search results
Results from the WOW.Com Content Network
For bicycles with 700c wheels, some cyclists quote gear inches based on a nominal wheel diameter of 27 inches, corresponding to the old British tire size of 27 x 1 + 1 ⁄ 4" (ETRTO 630). Strictly speaking, the rolling diameter of a 700c wheel may be significantly higher or lower than 27", depending on the tire size, e.g. nearly 27.5" for a ...
The chain is still used in agriculture: measuring wheels with a circumference of 0.1 chain (diameter ≈ 2.1 ft or 64 cm) are still readily available in Canada and the United States. For a rectangular tract, multiplying the number of turns of a chain wheel for each of two adjacent sides and dividing by 1,000 gives the area in acres.
1 ⁄ 2: 1: 8 ⁄ 8: 80: 5 ⁄ 8: Notes: *The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance). *The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
The chain in use on modern bicycles has a 1 ⁄ 2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in "#40" indicates the pitch of the chain in eighths of an inch; and ISO standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.
The rod, perch, or pole (sometimes also lug) is a surveyor's tool [1] and unit of length of various historical definitions. In British imperial and US customary units, it is defined as 16 + 1 ⁄ 2 feet, equal to exactly 1 ⁄ 320 of a mile, or 5 + 1 ⁄ 2 yards (a quarter of a surveyor's chain), and is exactly 5.0292 meters.
Since an acre measured 10 square chains in Gunter's system, the entire process of land area measurement could be computed using measurements in chains, and then converted to acres by dividing the results by 10. [2] Hence 10 chains by 10 chains (100 square chains) equals 10 acres, 5 chains by 5 chains (25 square chains) equals 2.5 acres.
A Gunter's chain showing the individual links. The link (usually abbreviated as "l.", "li." or "lnk."), sometimes called a Gunter’s link, is a unit of length formerly used in many English-speaking countries. In US customary units modern definition, the link is exactly 66 ⁄ 100 of a US survey foot, [1] or exactly 7.92 inches or 20.1168 cm.
A ruler, depicting two customary units of length, the centimeter and the inch. ... (quarter of a chain, 5 1 ⁄ 2 yards, or 5.0292 m) Australian building trades