Search results
Results from the WOW.Com Content Network
kgf/mm 2: ≡ 1 kgf/mm 2 = 9.806 65 × 10 6 Pa [33] kip per square inch: ksi ≡ 1 kipf/sq in ≈ 6.894 757 × 10 6 Pa [33] long ton per square foot: ≡ 1 long ton × g 0 / 1 sq ft ≈ 1.072 517 801 1595 × 10 5 Pa: micrometre of mercury: μmHg ≡ 13 595.1 kg/m 3 × 1 μm × g 0 ≈ 0.001 torr ≈ 0.133 3224 Pa [33] millimetre of mercury ...
The millimetre (SI symbol: mm) is a unit of length in the metric system equal to 10 −3 metres ( 1 / 1 000 m = 0.001 m). To help compare different orders of magnitude , this section lists lengths between 10 −3 m and 10 −2 m (1 mm and 1 cm).
a very fine grain of sand (0.063 mm diameter, 3 micrograms) 1 × 10 −12: One nanolitre 6.2 × 10 −11: A medium grain of sand (0.5 mm diameter, 1.5 milligrams) 5 × 10 −10: Volume of a poppy seed of 1-millimetre diameter [1] 1 × 10 −9: One cubic millimetre or one microlitre: 4 × 10 −9: Volume of a mustard seed of 2-millimetre ...
This is a list of firearm cartridges that have bullets in the 9 millimeters (0.35 in) to 9.99 millimeters (0.393 in) caliber range. Case length refers to the round case length. OAL refers to the overall length of the loaded round. All measurements are given in millimeters, followed by the equivalent in inches between parentheses.
A thousandth of an inch is a derived unit of length in a system of units using inches.Equal to 1 ⁄ 1000 of an inch, a thousandth is commonly called a thou / ˈ θ aʊ / (used for both singular and plural) or, particularly in North America, a mil (plural mils).
Mommes (mm), traditionally used to measure silk fabrics, the weight in pounds of a piece of fabric if it were sized 45 inches by 100 yards (1.2 m by 90 m). One momme = 4.340 g/m 2; 8 mommes is approximately 1 ounce per square yard or 35 g/m 2.
The .308 Winchester is measured across the grooves and uses a .308-in diameter (7.82-mm) bullet; the military-specification version is known as 7.62 × 51 mm NATO, so called because the bore diameter measured between the lands is 7.62 mm, and the cartridge has a case 51 mm long.
Many other sizes were in use, however, before the Eversharp's success made its .046 inch lead size a de facto standard (this size has been variously metricized as 1.1, 1.18, and 1.2 mm, all nominal sizes). Thinner .036 inch (0.9 mm) lead was introduced in the later 1930s and gradually became the new standard, eventually being displaced by 0.7 mm.