Search results
Results from the WOW.Com Content Network
The millimetre (SI symbol: mm) is a unit of length in the metric system equal to 10 −3 metres ( 1 / 1 000 m = 0.001 m). To help compare different orders of magnitude , this section lists lengths between 10 −3 m and 10 −2 m (1 mm and 1 cm).
a very fine grain of sand (0.063 mm diameter, 3 micrograms) 1 × 10 −12: One nanolitre 6.2 × 10 −11: A medium grain of sand (0.5 mm diameter, 1.5 milligrams) 5 × 10 −10: Volume of a poppy seed of 1-millimetre diameter [1] 1 × 10 −9: One cubic millimetre or one microlitre: 4 × 10 −9: Volume of a mustard seed of 2-millimetre ...
A thousandth of an inch is a derived unit of length in a system of units using inches.Equal to 1 ⁄ 1000 of an inch, a thousandth is commonly called a thou / ˈ θ aʊ / (used for both singular and plural) or, particularly in North America, a mil (plural mils).
Mommes (mm), traditionally used to measure silk fabrics, the weight in pounds of a piece of fabric if it were sized 45 inches by 100 yards (1.2 m by 90 m). One momme = 4.340 g/m 2; 8 mommes is approximately 1 ounce per square yard or 35 g/m 2.
This is a list of firearm cartridges that have bullets in the 9 millimeters (0.35 in) to 9.99 millimeters (0.393 in) caliber range. Case length refers to the round case length. OAL refers to the overall length of the loaded round. All measurements are given in millimeters, followed by the equivalent in inches between parentheses.
The .308 Winchester is measured across the grooves and uses a .308-in diameter (7.82-mm) bullet; the military-specification version is known as 7.62 × 51 mm NATO, so called because the bore diameter measured between the lands is 7.62 mm, and the cartridge has a case 51 mm long.
A large amount of materials can be readily loaded into 8-inch-diameter (200 mm) sieve trays. Two common uses in the powder industry are wet-sieving of milled limestone and dry-sieving of milled coal. Disadvantages : many PSDs are concerned with particles too small for separation by sieving to be practical.
Examples of nanowires include inorganic molecular nanowires (Mo 6 S 9−x I x, Li 2 Mo 6 Se 6), which can have a diameter of 0.9 nm and be hundreds of micrometers long. Other important examples are based on semiconductors such as InP, Si, GaN, etc., dielectrics (e.g. SiO 2 ,TiO 2 ), or metals (e.g. Ni, Pt).