Search results
Results from the WOW.Com Content Network
This manual safety is available for most trigger variants. The variants with the optional external ambidextrous thumb safety have similar dimensions compared to the variants without this feature, but weigh approximately 50 g (1.8 oz) more and the safety levers add 3.66 mm (0.144 in) width resulting in an overall width of 38.46 mm (1.514 in).
Considering the CCP's size, the 5.5-pound-force (24 N) trigger pull and the 0.27-inch (6.9 mm) trigger travel are relatively high. [ 1 ] Field stripping of the original CCP design (M1), required a special disassembly tool, while the revised CCP/M2 features a takedown lever for tool-less disassembly.
Due to safety concerns, the moderately long and heavy trigger pull of this type is seen as ideal for law enforcement and self-defense applications. [2] The SR9 and SR9c have identical trigger groups. Enthusiast website Gunblast rated both the SR9 and SR9c examples it tested with a factory trigger rearward travel at 9.5 mm (0.37 in).
SR1911: features a full length 8.67" slide with a 5" barrel, a standard magazine capacity of 8+1 and a weight of 39 oz. Constructed from low-glare stainless steel.; SR1911 Commander (SR1911CMD): has a shorter overall length of 7.75", shorter barrel length of 4.25", reduced magazine capacity of 7+1, and lighter unloaded weight of 36.40 oz.
The PPS has a trigger travel of approximately 6 mm (0.2 in) and a trigger pull of approximately 27 N (6.1 lb f). Unlike many other trigger systems preset internal strikers have a let-off point and trigger pull that remains unchanged from the first shot to the last and requires no decocker. [4]
The PPQ has a trigger travel of approximately 9 mm (0.4 in) with a relatively short trigger reset of 2.5 mm (0.1 in) and a trigger pull of approximately 25 N (5.6 lb f). Unlike many other trigger systems, preset internal strikers have a let-off point and trigger pull that remains unchanged from the first shot to the last and requires no decocker.
After 3 mm (0.12 in) of unrestricted rearward travel, the projectile leaves the barrel and the gas pressures drop to a safe level. A shaped lug on the underside of the barrel chamber comes into contact with a hooked locking block at the end of the steel recoil spring guide rod, lowering the rear end of the barrel and stopping the barrel's ...
The Steyr M is a series of semi-automatic pistols developed by Steyr Mannlicher GmbH & Co KG of Austria for police services and the civilian shooting market. Design work on the new pistol began in the early 1990s and the final product known as the M9 (adapted to fire the 9×19mm Parabellum cartridge) was officially unveiled in the spring of 1999. [1]