Search results
Results from the WOW.Com Content Network
The host adapter grounds this pin; if a device sees that the pin is grounded, it becomes the Device 0 (master) device; if it sees that pin 28 is open, the device becomes the Device 1 (slave) device. This setting is usually chosen by a jumper setting on the drive called "cable select", usually marked CS , which is separate from the Device 0/1 ...
A standard-sized 8-pin dual in-line package (DIP) containing a 555 IC.. Integrated circuits and certain other electronic components are put into protective packages to allow easy handling and assembly onto printed circuit boards and to protect the devices from damage.
The PlayStation Link Cable. The PlayStation Link Cable (SCPH-1040) is a peripheral cable for the first generation PlayStation console. Utilizing the serial I/O port found on the back of most PlayStation models, it allows for two consoles to be connected in order to play compatible multiplayer games on separate consoles and displays.
An Ethernet crossover cable is a crossover cable for Ethernet used to connect computing devices together directly. It is most often used to connect two devices of the same type, e.g. two computers (via their network interface controllers) or two switches to each other.
8-pin (left) and 6-pin (right) power connectors used on PCI Express cards. Optional connectors add 75 W (6-pin) or 150 W (8-pin) of +12 V power for up to 300 W total (2 × 75 W + 1 × 150 W). Sense0 pin is connected to ground by the cable or power supply, or float on board if cable is not connected.
Shrink plastic dual in-line package (SPDIP) – A denser version of the PDIP with a 0.07 in (1.778 mm) lead pitch. Skinny dual in-line package (SDIP or SPDIP [6]) – Sometimes used to refer to a "narrow" 0.300 in. (or 300 mil) wide DIP, normally when clarification is needed e.g. for DIP with 24 pins or more, which usually come in "wide" 0.600 ...
The 16-pin 12VHPWR connector, where HPWR stands for "High Power," supports higher power delivery to GPUs, up to 600 watts, a significant increase from the 150 watts of the 8-pin connector and the 75 watts of the 6-pin connector. [8] [9] Adapters converting multiple 8-pin to a single 16-pin connector are available. [10]
An intermediate switch can, however, be implemented by adding appropriate external wiring to an ordinary (six terminal) DPDT switch, or by using a separate DPDT relay. By connecting one or more 4-way (intermediate) switches in-line, with 3-way switches at either end, the load can be controlled from three or more locations.