Search results
Results from the WOW.Com Content Network
Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark ignition that use petrol as fuel, such as the Otto engine, and the Wankel engine.
The Electrojector is an electronically controlled multi-point injection system that has an analogue engine control unit, the so-called "modulator" that uses the intake manifold vacuum and the engine speed for metering the right amount of fuel. The fuel is injected intermittently, and with a constant pressure of 1.4 kp/cm 2 (20 psi; 137 kPa ...
Prior to 1979, the electronics in fuel injection systems used analogue electronics for the control system. The Bosch Motronic multi-point fuel injection system (also amongst the first systems where the ignition system is controlled by the same device as the fuel injection system) was the first mass-produced system to use digital electronics.
Common rail fuel system on a Volvo truck engine. In 1916 Vickers pioneered the use of mechanical common rail systems in G-class submarine engines. For every 90° of rotation, four plunger pumps allowed a constant injection pressure of 3,000 pounds per square inch (210 bar; 21 MPa), with fuel delivery to individual cylinders being shut off by valves in the injector lines. [1]
Carburetors used as intake runners A cutaway view of the intake of the original Fordson tractor (including the intake manifold, vaporizer, carburetor, and fuel lines). An inlet manifold or intake manifold (in American English) is the part of an internal combustion engine that supplies the fuel/air mixture to the cylinders. [1]
An electronically controlled unit injector (EUI) sometimes referred to as a mechanical electronic unit injector (MEUI) is a unit injector (UI) with electronic control. It performs the same function as a conventional unit injector in an internal combustion engine , such as in an on-road or off-road vehicle or a diesel-electric locomotive .
Fuel is pumped from the tank to a large control valve called a fuel distributor, which divides the single fuel supply line from the tank into smaller lines, one for each injector. The fuel distributor is mounted atop a control vane through which all intake air must pass, and the system works by varying fuel volume supplied to the injectors ...
This is the default pre-loaded code from Bowling and Grippo. It is a simple and effective fuel injection controller with an 8x8 fuel table for speed density or alpha-n. Narrow band or wide band oxygen sensors can be used for closed loop control, and an on/off idle valve may be used. MS1/Extra (MegaSquirt 'n Spark-Extra) [7]