Ads
related to: aspect ratio tirestirerack.com has been visited by 100K+ users in the past month
Search results
Results from the WOW.Com Content Network
Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [34] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.
Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.
Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.
The aspect ratio of a geometric shape is the ratio of its sizes in different dimensions. For example, the aspect ratio of a rectangle is the ratio of its longer side to its shorter side—the ratio of width to height, [1][2] when the rectangle is oriented as a "landscape". The aspect ratio is most often expressed as two integer numbers ...
2 or 3 digit number: The "aspect ratio" of the sidewall height to the total width of the tyre, as a percentage. An optional letter indicating construction of the fabric carcass of the tyre: B: bias belt (where the sidewalls are the same material as the tread, leading to a rigid ride) D: diagonal; R: radial. if omitted, then it is a cross ply tyre
For example a conventional passenger car tire might have the designation 245/45-18, indicating a tread section 245 mm wide, with an aspect ratio of 45% (i.e., the sidewall height is 45% the width of the tread section), mounted on an 18 inch conventional wheel.
Ads
related to: aspect ratio tirestirerack.com has been visited by 100K+ users in the past month