Search results
Results from the WOW.Com Content Network
Soil vapor extraction (SVE) is a physical treatment process for in situ remediation of volatile contaminants in vadose zone (unsaturated) soils (EPA, 2012). SVE (also referred to as in situ soil venting or vacuum extraction) is based on mass transfer of contaminant from the solid (sorbed) and liquid (aqueous or non-aqueous) phases into the gas phase, with subsequent collection of the gas phase ...
Soil vapor extraction (SVE) involves the use of multiple air injection points and multiple soil vapor extraction points that can be installed in contaminated soils to extract vapor phase contaminants above the water table. Contamination must be at least 3 feet (0.91 m) deep beneath the ground surface in order for the system to be effective.
According to the MAGS Manual, written by HSA and adopted by the Florida Department of Environmental Protection, MAGS is performed "by utilizing a typical regenerative blower fitted to a temporary soil vapor extraction well, [such that]a large volume of soil can be assessed with a limited number of samples. While lacking the resolution of ...
In-situ technologies include but are not limited to: solidification and stabilization, soil vapor extraction, permeable reactive barriers, monitored natural attenuation, bioremediation-phytoremediation, chemical oxidation, steam-enhanced extraction and in situ thermal desorption and have been used extensively in the USA. [11]
Dual-phase vacuum extraction (DPVE), also known as multi-phase extraction, is a technology that uses a high-vacuum system to remove both contaminated groundwater and soil vapor. In DPVE systems, a high-vacuum extraction well is installed with its screened section in the zone of contaminated soils and groundwater.
The design and cost of an ERH remediation system depends on a number of factors, primarily the volume of soil/groundwater to be treated, the type of contamination, and the treatment goals. The physical and chemical properties of the target compounds are governed by laws that make heated remediations advantageous over most conventional methods.
Extraction of groundwater or soil vapor with an active electromechanical system, with subsequent stripping of the contaminants from the extract. Containment of the soil contaminants (such as by capping or paving over in place). Phytoremediation, or using plants (such as willow) to extract heavy metals.
Often, these strategies are used in conjunction with each other or with other remedial strategies such as soil vapor extraction. In this process, vapor from the soil phase is extracted from soils and treated, which has the effect of removing contaminants from the soils and groundwater beneath a site. Binders can be added to contaminated soil to ...