Ads
related to: tapered vs non fork extension cable clamps for wood lathe machine hsn code
Search results
Results from the WOW.Com Content Network
Spindle nose on a lathe headstock. The small female taper is a Morse taper to take a lathe center or a tool such as a twist drill. The large male taper takes a lathe chuck, which is retained by the large nut. A machine taper is a system for securing cutting tools or toolholders in the spindle of a machine tool or power tool.
These chucks require a toothed key to provide the necessary torque to tighten and loosen the jaws. When the key is turned its teeth mate with teeth on the chuck, turning an internal screw which in turn moves the threaded jaws in or out along a tapered surface. The taper allows the jaws to clamp drill shanks of a range of diameters. The end view ...
Several machine collets (top and centre) and a dismantled pin chuck (below). Generally, a collet chuck, [3] considered as a unit, consists of a tapered receiving sleeve (sometimes integral with the machine spindle), the collet proper (usually made of spring steel) which is inserted into the receiving sleeve, and (often) a cap that screws over the collet, clamping it via another taper.
Upper row: F-clamp or bar clamp, one-handed bar clamp ("Quick Grip"), wooden handscrew; Lower row: spring clamp, C-clamp (G-clamp ), wooden cam clamp. A clamp is a fastening device used to hold or secure objects tightly together to prevent movement or separation through the application of inward pressure.
Dead center (the conical piece) mounted in the spindle of a lathe and being used to support a workpiece being driven by a carrier setup. A lathe center, often shortened to center, is a tool that has been ground to a point to accurately position a workpiece on an axis. They usually have an included angle of 60°, but in heavy machining ...
Main page; Contents; Current events; Random article; About Wikipedia; Contact us; Pages for logged out editors learn more
A tailstock, also known as a foot stock, [1] is a device often used as part of an engineering lathe, wood-turning lathe, or used in conjunction with a rotary table on a milling machine. It is usually used to apply support to the longitudinal rotary axis of a workpiece being machined.
It is a self-locking (or self holding) taper of approximately 5/8" per foot [3] that allows the torque to be transferred to the drill bit by the friction between the taper shank and the socket. The tang at the end of the taper provides a positive drive of the drill when the taper fails to grip. [ 4 ]
Ads
related to: tapered vs non fork extension cable clamps for wood lathe machine hsn code