Search results
Results from the WOW.Com Content Network
The KryoFlux controller plugs into a standard USB port, and allows normal PC floppy disk drives to be plugged into it. Because the device operates on data bits at the lowest possible level with very precise timing resolution, it allows modern PCs to read, decode and write floppy disks that use practically any data format or method of copy ...
3.5-inch and 5.25-inch drives connect to the floppy controller using a 34-conductor flat ribbon cable for signal and control. Most controllers support two floppy drives, although the Shugart standard supports up to four drives attached to a single controller. A cable could have 5.25-inch style connectors, 3.5-inch style connectors, or a ...
The WD1761-WD1767 series were versions of the FD179x series rated for a maximum clock frequency of 1 MHz, resulting in a data rate limit of 125 kbit/s for single density and 250 kbit/s for double density, thus preventing them from being used for 8-in (200 mm) floppy drives or the later "high-density" 5.25-inch (133 mm) or 90 mm floppy drives.
When the controller and disk drive are assembled as one device, as it is the case with some external floppy disk drives, e.g., Commodore 1540 and USB floppy disk drives, [27] the internal floppy disk drive and its interface are unchanged, while the assembled device presents a different interface such as IEEE-488, parallel port or USB.
drive: 1, diskette: 2 16 8 512 2× 64 kB 270 GCR (4/5) Internally based on FDU-250 Micro Floppy Disk Drive Unit [2] Thomson: 5 1 ⁄ 4 inch Single 1 40 16 128 80 kB 300 FM Thomson UD90.070 Double 2 256 320 kB MFM Thomson DD90-320 [NB 17] 3 1 ⁄ 2 inch Double 1 80 16 256 320 kB 300 MFM Thomson TO9, Thomson DD09-350 Double 2 640 kB
[citation needed] With increasing sales of microcomputers having built in floppy-disk drives (FDDs), HDDs that would fit to the FDD mountings became desirable. Thus HDD Form factors, initially followed those of 8-inch, 5.25-inch, and 3.5-inch floppy disk drives. Because there were no smaller floppy disk drives, smaller HDD form factors ...
8-inch floppy disk, inserted in drive, (3½-inch floppy diskette, in front, shown for scale) 3½-inch, high-density floppy diskettes with adhesive labels affixed The first commercial floppy disks, developed in the late 1960s, were 8 inches (203.2 mm) in diameter; [4] [5] they became commercially available in 1971 as a component of IBM products and both drives and disks were then sold ...
A 3.5″ drive containing both a card reader and a floppy drive, as well as a USB port, is also available. The dimensions of a 3.5″ drive are specified in the SFF standard specifications SFF-8300 and SFF-8301 , which were incorporated into the EIA-740 specification by the Electronic Industries Association (EIA).