Search results
Results from the WOW.Com Content Network
A fuse consists of a metal strip or wire fuse element, of small cross-section compared to the circuit conductors, mounted between a pair of electrical terminals, and (usually) enclosed by a non-combustible housing. The fuse is arranged in series to carry all the charge passing through the protected circuit. The resistance of the element ...
In electrical engineering, IEC 60269 is a set of technical standards for low-voltage power fuses. [1] The standard is in four volumes, which describe general requirements, fuses for industrial and commercial applications, fuses for residential applications, and fuses to protect semiconductor devices.
[53] The original BS 1363:1947 specified fuse ratings of 3 A, 7 A and 13 A. [54] The current version of the fuse standard, BS 1362:1973, allows any fuse rating up to 13 A, with 3 A (coloured red) and 13 A (coloured brown) as the preferred (but not mandated) values when used in a plug. All other ratings are to be coloured black.
Framework for assessment against BS 8900-1; BS 9997 Fire risk management systems. BS 9999 Fire safety in the design, management and use of buildings. Code of practice; BS 15000 for IT Service Management, , now ISO/IEC 20000; BS 3G 101 for general requirements for mechanical and electromechanical aircraft indicators
1A1A44J5 - Unit 1, Assembly 1, Sub-Assembly 44, Jack 5 (J5 is a connector on a box referenced as A44) 1A1A45J333 - Unit 1, Assembly 1, Sub-Assembly 45, Jack 333 (J333 is a connector on a box referenced as A45) A cable connecting these two might be: 1A1W35 - In the assembly A1 is a cable called W35. Connectors on this cable would be designated:
Electrical shocks on humans can lead to permanent disabilities or death. Size, frequency and duration of the electrical current affect the damage. [8] The effects from electric shock can be: stopping the heart beating properly, preventing the person from breathing, causing muscle spasms.
IEC 61000-3-2 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) is an international standard that limits mains voltage distortion by prescribing the maximum value for harmonic currents from the second harmonic up to and including the 40th harmonic current.
The connectors are specified in British Standard BS 6312. [1] [2] [3] Electrical characteristics of the telephone interface are specified by individual network operators, [4] e.g. in British Telecom's SIN 351. [5] Electrical characteristics required of British telephones used to be specified in BS 6305. [6]