enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Blower door - Wikipedia

   en.wikipedia.org/wiki/Blower_door

   The first blower door was further used to test the airtightness of the Saskatchewan Conservation House built in 1977, which was tested at 0.5 ach at 50 Pa. These early research efforts demonstrated the potential power of blower door testing in revealing otherwise unaccounted for energy losses in homes.

3. Duct leakage testing - Wikipedia

   en.wikipedia.org/wiki/Duct_leakage_testing

   A third test method to determine if ductwork is leaking to the outside is to use a pressure pan, which is a register cover with a pressure tap for a hose connection. With the house pressurized (or depressurized) to 50 Pa (-50 Pa) using a blower door, a pressure gauge is attached to the pressure pan by means of a hose.

4. Building envelope - Wikipedia

   en.wikipedia.org/wiki/Building_envelope

   A blower door test can be used to test the quality of the air sealing of the building envelope. Smoke pencils can be used to detect gaps and caulking and weather-stripping can be used to improve air sealing. [10]

5. Air changes per hour - Wikipedia

   en.wikipedia.org/wiki/Air_changes_per_hour

   The most common technique to measure airtightness is the fan pressurization method, also known as the blower door test. It is measured by the number of air changes per hour (ACH) that occur when there is a differential pressure of 50 pascals between outside and inside the building.

6. Section 608 - Wikipedia

   en.wikipedia.org/wiki/Section_608

   An initial verification test must then be done within 30/120 days, and then a follow-up test within 10 days of that. There are additional clauses for extensions if needed. If the leak is not to be repaired, there must be a plan to retire or retrofit the appliance within 30 days, to be completed within one year.

7. AOL Mail

   mail.aol.com

   Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!

8. Building airtightness - Wikipedia

   en.wikipedia.org/wiki/Building_airtightness

   Building airtightness levels can be measured by using a fan, temporarily installed in the building envelope (a blower door) to pressurize the building. Air flow through the fan creates an internal, uniform, static pressure within the building.

9. Infiltration (HVAC) - Wikipedia

   en.wikipedia.org/wiki/Infiltration_(HVAC)

   Smoke candles and blower-door tests can help identify less-than-obvious leaks. The Weatherization article describes methods for energy savings further. If infiltration is reduced below 0.35 ACH, it is recommended that mechanical ventilation (typically an exhaust fan or heat recovery ventilation ) be implemented.