Search results
Results from the WOW.Com Content Network
Early 1440p computer displays became commonly available in 2010. Dell's UltraSharp U2711 monitor was released in 2010 as WQHD, with a 1440p widescreen. [1] The 27-inch Apple LED Cinema Display released in 2010 also had a native resolution of 2560 × 1440, as did the Apple Thunderbolt Display which was sold from July 2011 to June 2016.
The resolution of 960H depends on whether the equipment is PAL or NTSC based: 960H represents 960 x 576 (PAL) or 960 x 480 (NTSC) pixels. [29] 960H represents an increase in pixels of some 30% over standard D1 resolution, which is 720 x 576 pixels (PAL), or 720 x 480 pixels (NTSC). The increased resolution over D1 comes as a result of a longer ...
Four times the resolution of 1080p. Requires a dual-link DVI, category 2 (high-speed) HDMI, DisplayPort or a single Thunderbolt link, and a reduced scan rate (up to 30 Hz); a DisplayPort 1.2 connection can support this resolution at 60 Hz, or 30 Hz in stereoscopic 3D. 3840×2160 (8,294k) 3840 2160 8,294,400 16:9 24 bpp DCI 4K
This format has a resolution of 2048 × 1080 (2.2 megapixels) with an aspect ratio of 256∶135 (1.8 962) or roughly "17∶9". [12] This is the native resolution for DCI-compliant 2K digital projectors – active displays with this resolution are rare. The display aspect ratio is frequently wider than the native one, requiring non-square pixels.
In 2012, 1920×1080 was the most commonly used resolution among Steam users. [14] At the same time, the most common resolution globally was 1366×768, overtaking the previous leader 1024×768. [ 15 ] In 2021, the 2K resolution of 1920×1080 was used by two thirds of the Steam users for the primary display with 1366×768 and 2560×1440 both at ...
1080p progressive scan HDTV, which uses a 16:9 ratio. Some commentators also use display resolution to indicate a range of input formats that the display's input electronics will accept and often include formats greater than the screen's native grid size even though they have to be down-scaled to match the screen's parameters (e.g. accepting a 1920 × 1080 input on a display with a native 1366 ...
DisplayPort Dual-Mode (DP++), also called Dual-Mode DisplayPort, is a standard which allows DisplayPort sources to use simple passive adapters to connect to HDMI or DVI displays. Dual-mode is an optional feature, so not all DisplayPort sources necessarily support DVI/HDMI passive adapters, though in practice nearly all devices do.
Some panels advertise a resolution only slightly smaller than the native, such as 1360×765. For these panels to be able to show a pixel perfect image, the EDID data must be ignored by the display driver or the driver must correctly interpret the DTD and be able to resolve resolutions whose size is not divisible by 8.