Search results
Results from the WOW.Com Content Network
Introduced in 2001 as the successor to the D575A-2 SD Super Dozer, the D575A-3 SD Super Dozer is a dedicated dozer with no ripper weighing 152,600 kilograms (336,400 lb). Equipped with a standard blade, the D575A-3 SD is capable of moving up to 90 cubic yards (69 m 3 ) of material per pass, however, when equipped with an optional blade, the ...
The D11N had some major improvements over the D10: it includes a bigger track and blade, and a longer track by 21 inches (0.53 m). The U blade was just under 21 feet (6.4 m) wide and 7 feet (2.1 m) high. This increased the blade capacity to 45 cu yd (34 m 3). The D11N's weight was 204,517 pounds (92,767 kg).
Over the years the OC-9 was in production, there were only slight modifications and improvements made to the design. The most notable were the blade push trunnions and hydraulic ram mounting positions. [6] The only real variant of the OC-9 was a track loader designated the OC-96, built on the same design as the OC-9. The OC-96 was modified ...
The Cat D10 could be ordered with up to a 19-foot (5.8 m) U-blade, and weighed in at 180,000 lb (82,000 kg). Later versions weighed in at 190,000 lb (86,000 kg). The U-blade was 7 feet (2.1 m) high and could push 35 cu yd (27 m 3) according to Caterpillar's literature. The November 1977 issue of Excavating Contractor magazine had a 2-page story ...
Several types of bulldozer blade can be used on the front of the tractor: Straight ("S-Blade"): A short blade with no lateral curve and no side wings. It can be used for fine grading; Angle: held by a U shape frame that has three holes on each side, to set the blade to 3 positions: right, center, and left.
The dozer blade usually has three variants: A straight blade ("S-blade") is short and has no lateral curve, with no side wings, and can be used for fine grading. A universal blade ("U-blade") is tall and very curved, and has large side wings to carry more material. A "S-U" combination blade is shorter, has less curvature, and has smaller side ...
The dozer blade on front of the tractor usually comes in 4 varieties: Straight ("S-Blade") which is short and has no lateral curve, no side wings, and can be used for fine grading. Angle: A type of blade, typically only 4' in height, that attaches to the dozers C-frame.
The dozer blade, for example, is bigger than anything Caterpillar has ever made. This bulldozer has a gross weight of 183 tonnes and is powered by two 675 hp (503 kW) Caterpillar engines placed horizontally opposed, which deliver a total combined output of 1,350 hp (1,010 kW). The super bulldozer has a blade that is 23 feet (7.0 m) wide and 9 ...