Search results
Results from the WOW.Com Content Network
In aeronautics, the rate of climb (RoC) is an aircraft's vertical speed, that is the positive or negative rate of altitude change with respect to time. [1] In most ICAO member countries, even in otherwise metric countries, this is usually expressed in feet per minute (ft/min); elsewhere, it is commonly expressed in metres per second (m/s).
When an airport is being analyzed for designing an instrument approach procedure, an obstacle departure procedure assessment is conducted first.Pass the departure end of the runway, Surveyors establish an obstacle clearance surface (OCS), which is an imaginary surface that rises at a 40:1 ratio under standard conditions, or 152ft per nautical miles.
The flight should climb to and maintain 5000 feet initially, and further clearance to FL330 may be expected (but is not guaranteed) ten minutes after departure. The frequency to which the crew should tune after departure is 124.50 MHz, and the transponder should be set to 6562 before departure. There is no void time in this example.
At a normal rate of climb (120 feet per nautical mile at this altitude), the maximum altitude that can be gained over that distance is 720 feet, which is 700 feet below the required MOCA. Thus, a MCA for fix ABC of 5900 feet MSL (700 feet above the MEA of the previous segment) will be published for fix ABC for traffic continuing into the airway ...
You are free: to share – to copy, distribute and transmit the work; to remix – to adapt the work; Under the following conditions: attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made.
An approach plate for the ILS or LOC approach to runway 14L at Cologne Bonn Airport, Germany.. Approach plates (or, more formally, instrument approach procedure charts) are the printed or digital charts of instrument approach procedures that pilots use to fly instrument approaches during instrument flight rules (IFR) operations.
En-route charts are divided into high and low versions, with information on airways and navaids for high- and low-altitude flight, respectively. The division between low altitude and high altitude is usually defined as the altitude that marks transition to flight levels (in the United States , this is taken to be 18,000 feet MSL by convention).
The version number starts at 1 and is increased each time the procedure is altered. The letter designates the runway (the route to be flown to a particular fix depends on the takeoff runway). For example, at Amsterdam Airport Schiphol , there are several published departure procedures to reach the GORLO waypoint (which is an intersection from ...