Search results
Results from the WOW.Com Content Network
Some had the same Mitsubishi manual transmission as the 2.0/2.3 but had different bellhousings. The 2.3, 2.8, and 2.9 also made it into the Ranger, and Bronco II. 4.0L was produced by Ford Cologne Germany (like the unrelated and the all-new metric Taurus/Sable FWD 3.0 V6). Both were put in the North American Ranger, Aerostar, Explorer platforms.
The Ford 400 engine was based on the 351 Cleveland but had a half-inch longer stroke than the 351 Cleveland. The 400 had "square" proportions, with a 4.0 in (102 mm) bore and stroke. Ford called the engine a "400" but in actuality it displaced 402.1 cu in (6.6 L; 6,590 cc). To accommodate the longer stroke, Ford engineers increased the block ...
This system is designed to result in reduced turbo lag when accelerating from a stop. The series-turbo system is set up to provide a better throttle response while in motion to give a power flow more like a naturally aspirated engine. The 6.4 L also has a DPF and dual EGR coolers which are capable of reducing exhaust gas temps by up to 1,000 ...
The goal of EGR is thus to reduce NO x production by reducing the combustion temperatures. In modern diesel engines, the EGR gas is usually cooled with a heat exchanger to allow the introduction of a greater mass of recirculated gas. However, uncooled EGR designs do exist; these are often referred to as hot-gas recirculation (HGR).
The Ford Ranger (T6) is a range of mid-size pickup trucks manufactured and sold by Ford Motor Company since 2011. The T6 consolidated worldwide production of the Ranger onto a single model range, replacing both the 1998–2012 Ranger marketed in North America and South America and the Mazda-derived Ranger sold in Asia-Pacific, Europe, and several Latin American markets.
The College of Engineering at Michigan State University (MSU) is made up of 9 departments [7] with 168 faculty members, over 6,000 undergraduate students, [8] 10 undergraduate [9] B.S. degree programs and a wide spectrum of graduate programs in both M.S. and Ph.D. levels.
2020–2021 Ford Explorer; 392 hp (292 kW) at 5650 rpm, 430 lb⋅ft (583 N⋅m) at 3500 rpm 2022–present Ford Ranger Raptor; 400 hp (298 kW) at 5500 rpm, 415 lb⋅ft (563 N⋅m) at 3500 rpm 2020–present Ford Explorer ST (2022– King Ranch & Platinum trims) 2020–present Ford Police Interceptor Utility; 2020–present Lincoln Aviator
The Ford Modular engine is an overhead camshaft (OHC) V8 and V10 gasoline-powered small block engine family introduced by Ford Motor Company in 1990 for the 1991 model year. . The term “modular” applied to the setup of tooling and casting stations in the Windsor and Romeo engine manufacturing plants, not the engine its