Search results
Results from the WOW.Com Content Network
This volume of natural gas has the same energy content as one US gallon of gasoline (based on lower heating values: 900 BTU/cu ft (9.3 kWh/m 3) of natural gas and 114,000 BTU/US gal (8.8 kWh/L) for gasoline). [22] One GGE of CNG pressurized at 2,400 psi (17 MPa) is 0.77 cubic feet (22 litres; 5.8 US gallons).
The density of an ideal gas is =, where M is the molar mass, P is the pressure, R is the universal gas constant, and T is the absolute temperature. This means that the density of an ideal gas can be doubled by doubling the pressure, or by halving the absolute temperature.
Density system unit unit-code symbol or abbrev. notes sample default conversion combination output units Metric: kilogram per cubic metre: kg/m3 kg/m 3: 1.0 kg/m 3 (1.7 lb/cu yd) kg/m3 lb/ft3 (kg/m3 lb/cuft) kg/m3 lb/yd3 (kg/m3 lb/cuyd) gram per cubic metre: g/m3 g/m 3: 1.0 g/m 3 (0.0017 lb/cu yd) g/m3 kg/m3; g/m3 lb/ft3 (g/cm3 lb/cuft) g/m3 lb ...
AMFA specifies the energy content of 100 cubic feet of natural gas to be equal to 0.823 gallons-equivalent of natural gas, and the gallon equivalency of natural gas is considered to have a fuel content, similar to that for alcohol fuels, equal to 0.15 gallons of fuel. For example, under this conversion and gallon equivalency, a dedicated ...
Gasoline + Oxygen –> Derived from Gasoline: 13.3 [citation needed] Dinitroacetylene explosive - computed [citation needed] 9.8: Octanitrocubane explosive: 8.5 [6] 16.9 [7] Tetranitrotetrahedrane explosive - computed [citation needed] 8.3: Heptanitrocubane explosive - computed [citation needed] 8.2: Sodium (reacted with chlorine) [citation ...
In 1963, this definition was refined as the space occupied by 10 pounds of distilled water of density 0.998 859 g/mL weighed in air of density 0.001 217 g/mL against weights of density 8.136 g/mL (the original "brass" was refined as the densities of brass alloys vary depending on metallurgical composition), which was calculated as 4.546 091 879 ...
The main petroleum component used in blending avgas is alkylate, which is a mixture of various isooctanes. Some refineries also use reformate.All grades of avgas that meet CAN 2–3 [further explanation needed], 25-M82 [further explanation needed] have a density of 6.01 pounds per US gallon (720 g/L) at 15 °C (59 °F).
On average, U.S. petroleum refineries produce about 19 to 20 gallons of gasoline, 11 to 13 gallons of distillate fuel diesel fuel and 3 to 4 gallons of jet fuel from each 42 gallon (152 liters) barrel of crude oil. The product ratio depends upon the processing in an oil refinery and the crude oil assay. [17]