Search results
Results from the WOW.Com Content Network
This volume of natural gas has the same energy content as one US gallon of gasoline (based on lower heating values: 900 BTU/cu ft (9.3 kWh/m 3) of natural gas and 114,000 BTU/US gal (8.8 kWh/L) for gasoline). [22] One GGE of CNG pressurized at 2,400 psi (17 MPa) is 0.77 cubic feet (22 litres; 5.8 US gallons).
The standard liter per minute (SLM or SLPM) is a unit of (molar or) mass flow rate of a gas at standard conditions for temperature and pressure (STP), which is most commonly practiced in the United States, whereas European practice revolves around the normal litre per minute (NLPM). [1]
In 1824, these units were replaced with a single system based on the imperial gallon. [a] Originally defined as the volume of 10 pounds (4.54 kg) of distilled water (under certain conditions), [b] then redefined by the Weights and Measures Act 1985 to be exactly 4.546 09 L (277.4 cu in), the imperial gallon is close in size to the old ale gallon.
Conversions between units in the metric system are defined by their prefixes (for example, 1 kilogram = 1000 grams, 1 milligram = 0.001 grams) and are thus not listed in this article. Exceptions are made if the unit is commonly known by another name (for example, 1 micron = 10 −6 metre).
A Shell petrol station selling 2* and 4* (leaded petrol) by the gallon in the UK, circa 1980. The British imperial gallon (frequently called simply "gallon") is defined as exactly 4.54609 dm 3 (4.54609 litres). [4]
[6] [7] Miles per gallon equivalent cost for alternate fuel can be calculated with a simple conversion to the conventional mpg (miles per gallon, miles/gal). See conversion to MPG by cost below. The MPGe metric was introduced in November 2010 by EPA in the Monroney sticker of the Nissan Leaf electric car and the Chevrolet Volt plug-in hybrid.
The reputed quart was a measure equal to two-thirds of an imperial quart (or one-sixth of an imperial gallon), at about 0.7577 liters, which is very close to one US fifth (0.757 liters). The reputed quart was previously recognized as a standard size of wine bottle in the United Kingdom, and is only about 1% larger than the current standard wine ...
The factor–label method can convert only unit quantities for which the units are in a linear relationship intersecting at 0 (ratio scale in Stevens's typology). Most conversions fit this paradigm. An example for which it cannot be used is the conversion between the Celsius scale and the Kelvin scale (or the Fahrenheit scale). Between degrees ...