Search results
Results from the WOW.Com Content Network
By connecting one or both wires to a different voltage, the voltage the fan receives will be different from the default 12 V the fan was designed for. Increasing the voltage [ 4 ] over the default 12 V can be achieved by e.g. connecting the −12 V or −5 V power line instead of the ground wire in the fan connector, and by connecting the 5 V ...
This Molex connector is used when connecting a fan to the motherboard or other circuit board. It is a small, thick, rectangular in-line female connector with two polarizing tabs on the outer-most edge of one long side. Pins are square and on a 0.1 inch (2.54 mm) pitch.
Usually, the standoff has a #6-32 UNC male thread on one end which screws into a threaded hole in the case or motherboard backplate and a #6-32 UNC female thread in the other end which accepts a screw to retain the motherboard. Less often, the standoff has a female thread in both ends and a second screw is used to attach it to the case.
A typical motherboard will have a different number of connections depending on its standard and form factor. A standard, modern ATX motherboard will typically have two or three PCI-Express x16 connection for a graphics card, one or two legacy PCI slots for various expansion cards, and one or two PCI-E x1 (which has superseded PCI).
A finned air cooled heatsink with fan clipped onto a CPU, with a smaller passive heatsink without fan in the background A 3-fan heatsink mounted on a video card to maximize cooling efficiency of the GPU and surrounding components Commodore 128DCR computer's switch-mode power supply, with a user-installed 60 mm cooling fan.
To the right is a smaller heat sink cooling another integrated circuit of the motherboard. Typical heatsink-fan combination found on a consumer laptop. The heatpipes which contain a working fluid make direct contact with the CPU and GPU, conducting heat away from the component and transferring it to the fin-stack mounted on the exhaust port of ...
The vast majority of people whose call records have been stolen by Chinese hackers have not been notified, according to industry sources.
1×6 pin header (one row) 1×6 female header (one row) A pin header (or simply, header) is a form of electrical connector.A male pin header consists of one or more rows of metal pins molded into a plastic base, often 2.54 mm (0.1 in) apart, though available in many spacings. [1]