Search results
Results from the WOW.Com Content Network
Kort nozzle The towboat Dolphin I in a floating drydock on the Mississippi River in Algiers, Louisiana. A ducted propeller, also known as a Kort nozzle, is a marine propeller fitted with a non-rotating nozzle. It is used to improve the efficiency of the propeller and is especially used on heavily loaded propellers or propellers with limited ...
Ludwig Kort (1888 - 1958 [1]) was a German fluid dynamicist known for developing the ducted propeller, or Kort nozzle. In an attempt to reduce canal erosion, Kort discovered that directing the wake of a propeller through a short, stationary nozzle also increased thrust. [2] He submitted a U.S. patent for this technique, which was awarded in ...
The Kort nozzle, pump-jet and rim-driven thruster are examples. An example propulsor is shown in the accompanying picture. It has a shroud which cuts down on blade-tip cavitation and radiated noise. It also has a rotor element and a stator. The stator concentrates the thrust in axial direction and reduces energy wasted in the tangential flow ...
Azimuth thrusters on the tug Oued el Kebir - note the Kort nozzles. There are two major variants, based on the location of the motor: [citation needed] Mechanical transmission, which connects a motor inside the ship to the outboard unit by gearing. The motor may be diesel or diesel-electric.
From Wikipedia, the free encyclopedia. Redirect page
Their kort-nozzle allows for a greater bollard pull however it loses its pull at anything over 10 knots (19 km/h; 12 mph) and loses speed in turns. [3] The Ville class are 13.71 m (45 ft 0 in) long with a beam of 4.72 m (15 ft 6 in) and a draught of 2.74 m (9 ft 0 in).
The duct is a Kort nozzle and enables the propeller to develop more thrust than an unducted propeller. The Pleuger rudder is necessarily mounted in the flow from the main engine's propeller in a ship with an odd number of propellers. If the Pleuger and the main engine are run at the same time, the Pleuger can often be torn away. [1]
The Z-drives have four-bladed propellers which are 57.1 inches (145 cm) in diameter [21] and are equipped with Kort nozzles. They can be operated in "tiller mode" where the Z-drives turn in the same direction to steer the ship, or in "Z-conn mode" where the two Z-drives can turn in different directions to achieve specific maneuvering objectives.