Ad
related to: 3 pin fan header pinout assembly replacement
Search results
Results from the WOW.Com Content Network
A PWM-capable fan is usually connected to a 4-pin connector (pinout: Ground, +12 V, sense, control). The sense pin is used to relay the rotation speed of the fan and the control pin is an open-drain or open-collector output, which requires a pull-up to 5 V or 3.3 V in the fan.
These can be plugged into 3-pin headers, but will lose their fan speed control. The Molex part number of receptacle is 47054-1000. The Molex part number of individual crimp contacts is 08-50-0114. The Molex part number of the header is 47053-1000. Four-pin Molex connector This connector is used when connecting the fan directly to the power supply.
1×6 pin header (one row) 1×6 female header (one row) A pin header (or simply, header) is a form of electrical connector. A male pin header consists of one or more rows of metal pins molded into a plastic base, often 2.54 mm (0.1 in) apart, though available in many spacings. [1] Male pin headers are cost-effective due to their simplicity.
1A1A44J5 - Unit 1, Assembly 1, Sub-Assembly 44, Jack 5 (J5 is a connector on a box referenced as A44) 1A1A45J333 - Unit 1, Assembly 1, Sub-Assembly 45, Jack 333 (J333 is a connector on a box referenced as A45) A cable connecting these two might be: 1A1W35 - In the assembly A1 is a cable called W35. Connectors on this cable would be designated ...
1× 2-pin DC Fan header 1× 2-pin RTC Battery header. 40-pin header with: up to 2 x SPI bus; up to 2 x I2C bus; up to 2 x UART; up to 3 x PWM; up to 1 x PCM/I2S(master/slave) up to 1 x S/PDIF TX; 2 x 5V power pins; 2 x 3.3V power pins; 8 x ground pins; 1 x 2-pin recovery header. 1 x 2-pin power-on & reset header. 1 x 3-pin debug UART header. 1 ...
Pin 1 is typically indicated on the body of the connector by a red or raised "V" mark. The corresponding wire in a ribbon cable is usually indicated by red coloration, a raised molded ridge, or markings printed onto the cable insulation. On the connector pin 2 is opposite pin 1, pin 3 is next to pin 1 along the length of the connector, and so on.
Pin-to-pin compatible devices share an assignment of functions to pins, but may have differing electrical characteristics (supply voltages, or oscillator frequencies) or thermal characteristics (TDPs, reflow curves, or temperature tolerances). As a result, their use in a system may require that portions of the system, such as its power delivery ...
PS/2 female socket pin numbering: note that it is a mirror of the male connector. The mini-DIN connectors are a family of multi-pin electrical connectors used in a variety of applications. Mini-DIN 9.5 millimetres (3 ⁄ 8 in) is similar to the larger, older 13.2 mm diameter DIN connector.
Ad
related to: 3 pin fan header pinout assembly replacement