Search results
Results from the WOW.Com Content Network
Automated manual transmissions can be semi-automatic or fully-automatic in operation. Several different systems to automate the clutch and/or shifting have been used over the years, but they will generally use one of the following methods of actuation for the clutch and/or shifting: hydraulic or electro-hydraulic actuation, [12] electro-mechanical, [13] pneumatic, [6] [14] [15] electromagnetic ...
The transmission control unit (TCU) in older automobiles with a clutchless manual transmission (without a clutch pedal) typically consists of an electrical switch connected to the gearshift, that is activated whenever the internal transmission control unit senses driver touching the gearshift to switch gears, which then primes a sensor or ...
Rain sensor on the windshield of a car. A rain sensor or rain switch is a switching device activated by rainfall. There are two main applications for rain sensors. The first is a water conservation device connected to an automatic irrigation system that causes the system to shut down in the event of rainfall.
The pump swivel angle covers both positive and negative flow direction. Disadvantages: The pump cannot be utilized for any other hydraulic function in an easy way and cooling can be a problem due to limited exchange of oil flow. High power closed loop systems generally must have a 'flush-valve' assembled in the circuit in order to exchange much ...
A manual transmission (MT), also known as manual gearbox, standard transmission (in Canada, the United Kingdom and the United States), or stick shift (in the United States), is a multi-speed motor vehicle transmission system where gear changes require the driver to manually select the gears by operating a gear stick and clutch (which is usually ...
Main page; Contents; Current events; Random article; About Wikipedia; Contact us
The rear pump was an unregulated gear pump driven from the transmission output shaft, which meant it was capable of pressurizing the transmission if the vehicle was in motion. This feature made it possible to push-start a vehicle with a dead battery if the vehicle could be accelerated to at least 15–20 mph (24–32 km/h).
Oil pump from a scooter engine. A gear pump uses the meshing of gears to pump fluid by displacement. [1] They are one of the most common types of pumps for hydraulic fluid power applications. The gear pump was invented around 1600 by Johannes Kepler. [2] Gear pumps are also widely used in chemical installations to pump high-viscosity fluids.