Search results
Results from the WOW.Com Content Network
Lift may also be largely horizontal, for instance on a sailing ship. The lift discussed in this article is mainly in relation to airfoils; marine hydrofoils and propellers share the same physical principles and work in the same way, despite differences between air and water such as density, compressibility, and viscosity.
Lift and drag are the two components of the total aerodynamic force acting on an aerofoil or aircraft.. In aerodynamics, the lift-to-drag ratio (or L/D ratio) is the lift generated by an aerodynamic body such as an aerofoil or aircraft, divided by the aerodynamic drag caused by moving through air.
Lift-induced drag, induced drag, vortex drag, or sometimes drag due to lift, in aerodynamics, is an aerodynamic drag force that occurs whenever a moving object redirects the airflow coming at it. This drag force occurs in airplanes due to wings or a lifting body redirecting air to cause lift and also in cars with airfoil wings that redirect air ...
Lift-induced drag (also called induced drag) is drag which occurs as the result of the creation of lift on a three-dimensional lifting body, such as the wing or propeller of an airplane. Induced drag consists primarily of two components: drag due to the creation of trailing vortices ( vortex drag ); and the presence of additional viscous drag ...
As the lift generated by a sail increases, so does lift-induced drag, which together with parasitic drag constitutes total drag, (D). This occurs when the angle of attack increases with sail trim or change of course to cause the lift coefficient to increase up to the point of aerodynamic stall , so does the lift-induced drag coefficient .
In flight a powered aircraft can be considered as being acted on by four forces: lift, weight, thrust, and drag. [1] Thrust is the force generated by the engine (whether that engine be a jet engine, a propeller, or -- in exotic cases such as the X-15-- a rocket) and acts in a forward direction for the purpose of overcoming drag. [2]
where C L and C D are lift coefficient and drag coefficient respectively. Each coefficient is a function of the angle of attack and Reynolds number. As the angle of attack increases lift rises rapidly from the no lift angle before slowing its increase and then decreasing, with a sharp drop as the stall angle is reached and flow is disrupted ...
A lift and drag curve obtained in wind tunnel testing is shown on the right. The curve represents an airfoil with a positive camber so some lift is produced at zero angle of attack. With increased angle of attack, lift increases in a roughly linear relation, called the slope of the lift curve.