Search results
Results from the WOW.Com Content Network
A wireless microphone, or cordless microphone, is a microphone without a physical cable connecting it directly to the sound recording or amplifying equipment with which it is associated. Also known as a radio microphone , it has a small, battery-powered radio transmitter in the microphone body, which transmits the audio signal from the ...
In the UK, the use of wireless microphone systems requires a Wireless Telegraphy Act license, except for the license-free bands of 173.8–175.0 MHz and 863–865 MHz. These license-free bands are sometimes referred to as "Channel 70" (not to be confused with TV Channel 69, which operated on 854–862 MHz and always required a license from JFMG ...
Bluetooth devices intended for use in short-range personal area networks operate from 2.4 to 2.4835 GHz. To reduce interference with other protocols that use the 2.45 GHz band, the Bluetooth protocol divides the band into 80 channels (numbered from 0 to 79, each 1 MHz wide) and changes channels up to 1600 times per second.
When it is necessary to capture audio covering the entire 20–20,000 Hz range of human hearing [6] such as when recording music or many types of acoustic events, audio waveforms are typically sampled at 44.1 kHz , 48 kHz, 88.2 kHz, or 96 kHz. [7] The approximately double-rate requirement is a consequence of the Nyquist theorem. Sampling rates ...
A wireless microphone with a non-diversity receiver (a receiver having only one antenna) is prone to random drop-outs, fades, noise, or other interference, especially if the transmitter (the wireless microphone) is in motion. A wireless microphone or sound system using diversity reception will switch to the other antenna within microseconds if ...
Introduction to RF propagation, John S. Seybold, 2000, John Wiley and Sons. Propagation data and prediction methods for the planning of indoor radio communication systems and the radio local area networks in the frequency range 900 MHz to 100 GHz, ITU-R Recommendations, Geneva, 2001.
Litke’s wireless mike resembled a silver tube with “a microphone at the top, a transmitter in the middle and its battery power supply at the bottom.” [1] It was 6 inches long, 1 inch in diameter, and weighed 7 ounces; the device had a broadcast range of up to a half-mile. Two types of mikes were available: lavalier and hand-held.
In broadcast engineering, the reference distance is the distance which, under normal circumstances and flat terrain, a radio station would travel with a particular level of signal strength. This distance depends on two factors: effective radiated power (ERP) and height above average terrain (HAAT).