Search results
Results from the WOW.Com Content Network
Service access points are also used in IEEE 802.2 Logical Link Control in Ethernet and similar data link layer protocols. When using the OSI Network system (CONS or CLNS), the base for constructing an address for a network element is an NSAP address, similar in concept to an IP address.
Jabbering ports are partitioned off the network until a carrier is no longer detected. [63] End nodes utilizing a MAC layer will usually detect an oversized Ethernet frame and cease receiving. A bridge/switch will not forward the frame. [64] A non-uniform frame size configuration in the network using jumbo frames may be detected as jabber by ...
The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating Point-to-Point Protocol (PPP) frames inside Ethernet frames. It appeared in 1999, in the context of the boom of DSL as the solution for tunneling packets over the DSL connection to the ISP 's IP network, and from there to the rest of the Internet .
On UTP cable, a local collision is detected on the local segment only when a station detects a signal on the RX pair at the same time it is sending on the TX pair. Since the two signals are on different pairs, there is no characteristic change in the signal. Collisions are only recognized on UTP when the station is operating in half-duplex.
Ethernet physical layer; A standard 8P8C (often called RJ45) connector used most commonly on category 5 cable, one of the types of cabling used in Ethernet networks Standard IEEE 802.3 (1983 onwards) Physical media Twisted pair, optical fiber, coaxial cable Network topology Point-to-point, star, bus Major variants
A single-octet node address is unique only to an individual network. Ethernet I (DIX v1.0) 1980-09 [b] 10 Mbit/s (1.25 MB/s) over thick coax. Frames have a Type field. This frame format is used on all forms of Ethernet by protocols in the Internet protocol suite. Six-octet MAC address. Ethernet II (DIX v2.0) 1982-11 [b] 802.3-1985 1983-06
A network tap is a system that monitors events on a local network. A tap is typically a dedicated hardware device, which provides a way to access the data flowing across a computer network. The network tap has (at least) three ports: an A port, a B port, and a monitor port. A tap inserted between A and B passes all traffic (send and receive ...
The OSI model uses a Service Access Point (SAP) to define the communication between layers (like Network, Transport, Session, and the other layers of the seven-layer model), that is to identify which protocol should process an incoming message. Within a given layer, programs can exchange data by a mutually agreed-upon protocol mechanism.